etc and var customers

etc/pam.d/chfn

@@ -0,0 +1,16 @@
+#
+# The PAM configuration file for the Shadow `chfn' service
+#
+
+# This allows root to change user infomation without being
+# prompted for a password
+auth		sufficient	pam_rootok.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+@include common-auth
+@include common-account
+@include common-session
+
+

etc/pam.d/chpasswd

@@ -0,0 +1,5 @@
+# The PAM configuration file for the Shadow 'chpasswd' service
+#
+
+@include common-password
+

etc/pam.d/chsh

@@ -0,0 +1,20 @@
+#
+# The PAM configuration file for the Shadow `chsh' service
+#
+
+# This will not allow a user to change their shell unless
+# their current one is listed in /etc/shells. This keeps
+# accounts with special shells from changing them.
+auth       required   pam_shells.so
+
+# This allows root to change user shell without being
+# prompted for a password
+auth		sufficient	pam_rootok.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+@include common-auth
+@include common-account
+@include common-session
+

etc/pam.d/common-account

@@ -0,0 +1,25 @@
+#
+# /etc/pam.d/common-account - authorization settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authorization modules that define
+# the central access policy for use on the system.  The default is to
+# only deny service to users whose accounts are expired in /etc/shadow.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+#
+
+# here are the per-package modules (the "Primary" block)
+account	[success=1 new_authtok_reqd=done default=ignore]	pam_unix.so 
+# here's the fallback if no module succeeds
+account	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+account	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config

etc/pam.d/common-auth

@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-auth - authentication settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authentication modules that define
+# the central authentication scheme for use on the system
+# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
+# traditional Unix authentication mechanisms.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+auth	[success=1 default=ignore]	pam_unix.so nullok_secure
+# here's the fallback if no module succeeds
+auth	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+auth	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+auth	optional			pam_cap.so 
+# end of pam-auth-update config

etc/pam.d/common-password

@@ -0,0 +1,33 @@
+#
+# /etc/pam.d/common-password - password-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define the services to be
+# used to change user passwords.  The default is pam_unix.
+
+# Explanation of pam_unix options:
+#
+# The "sha512" option enables salted SHA512 passwords.  Without this option,
+# the default is Unix crypt.  Prior releases used the option "md5".
+#
+# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
+# login.defs.
+#
+# See the pam_unix manpage for other options.
+
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+password	[success=1 default=ignore]	pam_unix.so obscure sha512
+# here's the fallback if no module succeeds
+password	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+password	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config

etc/pam.d/common-session

@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-session - session-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of sessions of *any* kind (both interactive and
+# non-interactive).
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so 
+session	optional	pam_systemd.so 
+# end of pam-auth-update config

etc/pam.d/common-session-noninteractive

@@ -0,0 +1,25 @@
+#
+# /etc/pam.d/common-session-noninteractive - session-related modules
+# common to all non-interactive services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of all non-interactive sessions.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so 
+# end of pam-auth-update config

etc/pam.d/cron

@@ -0,0 +1,21 @@
+# The PAM configuration file for the cron daemon
+
+@include common-auth
+
+# Sets the loginuid process attribute
+session    required     pam_loginuid.so
+
+# Read environment variables from pam_env's default files, /etc/environment
+# and /etc/security/pam_env.conf.
+session       required   pam_env.so
+
+# In addition, read system locale information
+session       required   pam_env.so envfile=/etc/default/locale
+
+@include common-account
+@include common-session-noninteractive 
+
+# Sets up user limits, please define limits for cron tasks
+# through /etc/security/limits.conf
+session    required   pam_limits.so
+

etc/pam.d/login

@@ -0,0 +1,116 @@
+#
+# The PAM configuration file for the Shadow `login' service
+#
+
+# Enforce a minimal delay in case of failure (in microseconds).
+# (Replaces the `FAIL_DELAY' setting from login.defs)
+# Note that other modules may require another minimal delay. (for example,
+# to disable any delay, you should add the nodelay option to pam_unix)
+auth       optional   pam_faildelay.so  delay=3000000
+
+# Outputs an issue file prior to each login prompt (Replaces the
+# ISSUE_FILE option from login.defs). Uncomment for use
+# auth       required   pam_issue.so issue=/etc/issue
+
+# Disallows root logins except on tty's listed in /etc/securetty
+# (Replaces the `CONSOLE' setting from login.defs)
+#
+# With the default control of this module:
+#   [success=ok new_authtok_reqd=ok ignore=ignore user_unknown=bad default=die]
+# root will not be prompted for a password on insecure lines.
+# if an invalid username is entered, a password is prompted (but login
+# will eventually be rejected)
+#
+# You can change it to a "requisite" module if you think root may mis-type
+# her login and should not be prompted for a password in that case. But
+# this will leave the system as vulnerable to user enumeration attacks.
+#
+# You can change it to a "required" module if you think it permits to
+# guess valid user names of your system (invalid user names are considered
+# as possibly being root on insecure lines), but root passwords may be
+# communicated over insecure lines.
+auth [success=ok new_authtok_reqd=ok ignore=ignore user_unknown=bad default=die] pam_securetty.so
+
+# Disallows other than root logins when /etc/nologin exists
+# (Replaces the `NOLOGINS_FILE' option from login.defs)
+auth       requisite  pam_nologin.so
+
+# SELinux needs to be the first session rule. This ensures that any
+# lingering context has been cleared. Without this it is possible
+# that a module could execute code in the wrong domain.
+# When the module is present, "required" would be sufficient (When SELinux
+# is disabled, this returns success.)
+session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
+
+# Sets the loginuid process attribute
+session    required     pam_loginuid.so
+
+# SELinux needs to intervene at login time to ensure that the process
+# starts in the proper default security context. Only sessions which are
+# intended to run in the user's context should be run after this.
+session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
+# When the module is present, "required" would be sufficient (When SELinux
+# is disabled, this returns success.)
+
+# This module parses environment configuration file(s)
+# and also allows you to use an extended config
+# file /etc/security/pam_env.conf.
+# 
+# parsing /etc/environment needs "readenv=1"
+session       required   pam_env.so readenv=1
+# locale variables are also kept into /etc/default/locale in etch
+# reading this file *in addition to /etc/environment* does not hurt
+session       required   pam_env.so readenv=1 envfile=/etc/default/locale
+
+# Standard Un*x authentication.
+@include common-auth
+
+# This allows certain extra groups to be granted to a user
+# based on things like time of day, tty, service, and user.
+# Please edit /etc/security/group.conf to fit your needs
+# (Replaces the `CONSOLE_GROUPS' option in login.defs)
+auth       optional   pam_group.so
+
+# Uncomment and edit /etc/security/time.conf if you need to set
+# time restraint on logins.
+# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
+# as well as /etc/porttime)
+# account    requisite  pam_time.so
+
+# Uncomment and edit /etc/security/access.conf if you need to
+# set access limits.
+# (Replaces /etc/login.access file)
+# account  required       pam_access.so
+
+# Sets up user limits according to /etc/security/limits.conf
+# (Replaces the use of /etc/limits in old login)
+session    required   pam_limits.so
+
+# Prints the last login info upon successful login
+# (Replaces the `LASTLOG_ENAB' option from login.defs)
+session    optional   pam_lastlog.so
+
+# Prints the message of the day upon successful login.
+# (Replaces the `MOTD_FILE' option in login.defs)
+# This includes a dynamically generated part from /run/motd.dynamic
+# and a static (admin-editable) part from /etc/motd.
+session    optional   pam_motd.so motd=/run/motd.dynamic
+session    optional   pam_motd.so noupdate
+
+# Prints the status of the user's mailbox upon successful login
+# (Replaces the `MAIL_CHECK_ENAB' option from login.defs). 
+#
+# This also defines the MAIL environment variable
+# However, userdel also needs MAIL_DIR and MAIL_FILE variables
+# in /etc/login.defs to make sure that removing a user 
+# also removes the user's mail spool file.
+# See comments in /etc/login.defs
+session    optional   pam_mail.so standard
+
+# Create a new session keyring.
+session    optional   pam_keyinit.so force revoke
+
+# Standard Un*x account and session
+@include common-account
+@include common-session
+@include common-password

etc/pam.d/newusers

@@ -0,0 +1,5 @@
+# The PAM configuration file for the Shadow 'newusers' service
+#
+
+@include common-password
+

etc/pam.d/other

@@ -0,0 +1,16 @@
+#
+# /etc/pam.d/other - specify the PAM fallback behaviour
+#
+# Note that this file is used for any unspecified service; for example
+#if /etc/pam.d/cron  specifies no session modules but cron calls
+#pam_open_session, the session module out of /etc/pam.d/other is
+#used.  If you really want nothing to happen then use pam_permit.so or
+#pam_deny.so as appropriate.
+
+# We fall back to the system default in /etc/pam.d/common-*
+# 
+
+@include common-auth
+@include common-account
+@include common-password
+@include common-session

etc/pam.d/passwd

@@ -0,0 +1,6 @@
+#
+# The PAM configuration file for the Shadow `passwd' service
+#
+
+@include common-password
+

etc/pam.d/polkit-1

@@ -0,0 +1,8 @@
+#%PAM-1.0
+
+@include common-auth
+@include common-account
+@include common-password
+session       required   pam_env.so readenv=1 user_readenv=0
+session       required   pam_env.so readenv=1 envfile=/etc/default/locale user_readenv=0
+@include common-session-noninteractive

etc/pam.d/runuser

@@ -0,0 +1,5 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+session		optional	pam_keyinit.so revoke
+session		required	pam_limits.so
+session		required	pam_unix.so

etc/pam.d/runuser-l

@@ -0,0 +1,5 @@
+#%PAM-1.0
+auth		include		runuser
+session		optional	pam_keyinit.so force revoke
+-session	optional	pam_systemd.so
+session		include		runuser

etc/pam.d/su

@@ -0,0 +1,61 @@
+#
+# The PAM configuration file for the Shadow `su' service
+#
+
+# This allows root to su without passwords (normal operation)
+auth       sufficient pam_rootok.so
+
+# Uncomment this to force users to be a member of group root
+# before they can use `su'. You can also add "group=foo"
+# to the end of this line if you want to use a group other
+# than the default "root" (but this may have side effect of
+# denying "root" user, unless she's a member of "foo" or explicitly
+# permitted earlier by e.g. "sufficient pam_rootok.so").
+# (Replaces the `SU_WHEEL_ONLY' option from login.defs)
+# auth       required   pam_wheel.so
+
+# Uncomment this if you want wheel members to be able to
+# su without a password.
+# auth       sufficient pam_wheel.so trust
+
+# Uncomment this if you want members of a specific group to not
+# be allowed to use su at all.
+# auth       required   pam_wheel.so deny group=nosu
+
+# Uncomment and edit /etc/security/time.conf if you need to set
+# time restrainst on su usage.
+# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
+# as well as /etc/porttime)
+# account    requisite  pam_time.so
+
+# This module parses environment configuration file(s)
+# and also allows you to use an extended config
+# file /etc/security/pam_env.conf.
+# 
+# parsing /etc/environment needs "readenv=1"
+session       required   pam_env.so readenv=1
+# locale variables are also kept into /etc/default/locale in etch
+# reading this file *in addition to /etc/environment* does not hurt
+session       required   pam_env.so readenv=1 envfile=/etc/default/locale
+
+# Defines the MAIL environment variable
+# However, userdel also needs MAIL_DIR and MAIL_FILE variables
+# in /etc/login.defs to make sure that removing a user 
+# also removes the user's mail spool file.
+# See comments in /etc/login.defs
+#
+# "nopen" stands to avoid reporting new mail when su'ing to another user
+session    optional   pam_mail.so nopen
+
+# Sets up user limits according to /etc/security/limits.conf
+# (Replaces the use of /etc/limits in old login)
+session    required   pam_limits.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+@include common-auth
+@include common-account
+@include common-session
+
+

etc/pam.d/su-l

@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth		include		su
+account		include		su
+password	include		su
+session		optional	pam_keyinit.so force revoke
+session		include		su