etc and var customers

etc/usb_modeswitch.conf

@@ -0,0 +1,40 @@
+# Configuration for the usb_modeswitch package, a mode switching tool for
+# USB devices providing multiple states or modes
+#
+# Evaluated by the wrapper script /usr/sbin/usb_modeswitch_dispatcher
+#
+# To enable an option, set it to "1", "yes" or "true" (case doesn't matter)
+# Everything else counts as "disable"
+
+
+# Disable automatic mode switching globally (e.g. to access the original
+# install storage)
+
+DisableSwitching=0
+
+# Disable check for MBIM module presence and configuration globally (to aid
+# special embedded environments). Available as per-device parameter
+# 'NoMBIMCheck'
+
+DisableMBIMGlobal=0
+
+# Enable logging (results in a extensive report file in /var/log, named
+# "usb_modeswitch_<interface-name>" and probably others
+
+EnableLogging=0
+
+# Optional increase of "delay_use" for the usb-storage driver; there are hints
+# that a recent kernel default change to 1 sec. may lead to problems, particu-
+# larly with USB 3.0 ports. Set this to at least 3 (seconds) in that case.
+# Does nothing if the current system value is same or higher
+
+#SetStorageDelay=4
+
+# If the configuration for your Huawei modem uses the standard switching method,
+# you can globally set an alternative method here which provides a different mode:
+# either plain serial PPP (for older modems) or NCM which integrates nicely
+# with recent Linux distributions, possibly avoiding configuration through a
+# modem built-in web page. All other modems are not affected.
+# Available as per-device parameter 'AltHuaweiMode'
+
+HuaweiAltModeGlobal=0