diff --git a/lib/configfiles/jessie.xml b/lib/configfiles/jessie.xml index 27050f9b..f60a1b9f 100644 --- a/lib/configfiles/jessie.xml +++ b/lib/configfiles/jessie.xml @@ -373,7 +373,548 @@ exit "$RETVAL" - + + + + + +################################# +# allow-dnsupdate-from A global setting to allow DNS updates from these IP ranges. +# +# allow-dnsupdate-from=127.0.0.0/8,::1 + +################################# +# allow-recursion List of subnets that are allowed to recurse +# +allow-recursion=127.0.0.1 + +################################# +# also-notify When notifying a domain, also notify these nameservers +# +# also-notify= + +################################# +# any-to-tcp Answer ANY queries with tc=1, shunting to TCP +# +# any-to-tcp=no + +################################# +# cache-ttl Seconds to store packets in the PacketCache +# +# cache-ttl=20 + +################################# +# carbon-interval Number of seconds between carbon (graphite) updates +# +# carbon-interval=30 + +################################# +# carbon-ourname If set, overrides our reported hostname for carbon stats +# +# carbon-ourname= + +################################# +# carbon-server If set, send metrics in carbon (graphite) format to this server +# +# carbon-server= + +################################# +# chroot If set, chroot to this directory for more security +# +# chroot= + +################################# +# config-dir Location of configuration directory (pdns.conf) +# +config-dir=/etc/powerdns + +################################# +# config-name Name of this virtual configuration - will rename the binary image +# +# config-name= + +################################# +# control-console Debugging switch - don't use +# +# control-console=no + +################################# +# daemon Operate as a daemon +# +daemon=yes + +################################# +# default-ksk-algorithms Default KSK algorithms +# +# default-ksk-algorithms=rsasha256 + +################################# +# default-ksk-size Default KSK size (0 means default) +# +# default-ksk-size=0 + +################################# +# default-soa-mail mail address to insert in the SOA record if none set in the backend +# +# default-soa-mail= + +################################# +# default-soa-name name to insert in the SOA record if none set in the backend +# +# default-soa-name=a.misconfigured.powerdns.server + +################################# +# default-ttl Seconds a result is valid if not set otherwise +# +# default-ttl=3600 + +################################# +# default-zsk-algorithms Default ZSK algorithms +# +# default-zsk-algorithms=rsasha256 + +################################# +# default-zsk-size Default ZSK size (0 means default) +# +# default-zsk-size=0 + +################################# +# direct-dnskey Fetch DNSKEY RRs from backend during DNSKEY synthesis +# +# direct-dnskey=no + +################################# +# disable-axfr Disable zonetransfers but do allow TCP queries +# +# disable-axfr=no + +################################# +# disable-axfr-rectify Disable the rectify step during an outgoing AXFR. Only required for regression testing. +# +# disable-axfr-rectify=no + +################################# +# disable-tcp Do not listen to TCP queries +# +# disable-tcp=no + +################################# +# distributor-threads Default number of Distributor (backend) threads to start +# +# distributor-threads=3 + +################################# +# do-ipv6-additional-processing Do AAAA additional processing +# +# do-ipv6-additional-processing=yes + +################################# +# edns-subnet-processing If we should act on EDNS Subnet options +# +# edns-subnet-processing=no + +################################# +# entropy-source If set, read entropy from this file +# +# entropy-source=/dev/urandom + +################################# +# experimental-api-key REST API Static authentication key (required for API use) +# +# experimental-api-key= + +################################# +# experimental-api-readonly If the JSON API should disallow data modification +# +# experimental-api-readonly=no + +################################# +# experimental-dname-processing If we should support DNAME records +# +# experimental-dname-processing=no + +################################# +# experimental-dnsupdate Enable/Disable DNS update (RFC2136) support. Default is no. +# +# experimental-dnsupdate=no + +################################# +# experimental-json-interface If the webserver should serve JSON data +# +# experimental-json-interface=no + +################################# +# experimental-logfile Filename of the log file for JSON parser +# +# experimental-logfile=/var/log/pdns.log + +################################# +# forward-dnsupdate A global setting to allow DNS update packages that are for a Slave domain, to be forwarded to the master. +# +# forward-dnsupdate=yes + +################################# +# guardian Run within a guardian process +# +guardian=yes + +################################# +# include-dir Include *.conf files from this directory +# +# include-dir= +include-dir=/etc/powerdns/pdns.d + +################################# +# launch Which backends to launch and order to query them in +# +# launch= + +################################# +# load-modules Load this module - supply absolute or relative path +# +# load-modules= + +################################# +# local-address Local IP addresses to which we bind +# +local-address=,127.0.0.1 + +################################# +# local-address-nonexist-fail Fail to start if one or more of the local-address's do not exist on this server +# +# local-address-nonexist-fail=yes + +################################# +# local-ipv6 Local IP address to which we bind +# +# local-ipv6= + +################################# +# local-ipv6-nonexist-fail Fail to start if one or more of the local-ipv6 addresses do not exist on this server +# +# local-ipv6-nonexist-fail=yes + +################################# +# local-port The port on which we listen +# +# local-port=53 + +################################# +# log-dns-details If PDNS should log DNS non-erroneous details +# +# log-dns-details=no + +################################# +# log-dns-queries If PDNS should log all incoming DNS queries +# +# log-dns-queries=no + +################################# +# logging-facility Log under a specific facility +# +# logging-facility= + +################################# +# loglevel Amount of logging. Higher is more. Do not set below 3 +# +# loglevel=4 + +################################# +# lua-prequery-script Lua script with prequery handler +# +# lua-prequery-script= + +################################# +# master Act as a master +# +master=yes + +################################# +# max-cache-entries Maximum number of cache entries +# +# max-cache-entries=1000000 + +################################# +# max-ent-entries Maximum number of empty non-terminals in a zone +# +# max-ent-entries=100000 + +################################# +# max-nsec3-iterations Limit the number of NSEC3 hash iterations +# +# max-nsec3-iterations=500 + +################################# +# max-queue-length Maximum queuelength before considering situation lost +# +# max-queue-length=5000 + +################################# +# max-signature-cache-entries Maximum number of signatures cache entries +# +# max-signature-cache-entries= + +################################# +# max-tcp-connections Maximum number of TCP connections +# +# max-tcp-connections=10 + +################################# +# module-dir Default directory for modules +# +# module-dir=/usr/lib/TRIPLET/pdns + +################################# +# negquery-cache-ttl Seconds to store negative query results in the QueryCache +# +# negquery-cache-ttl=60 + +################################# +# no-shuffle Set this to prevent random shuffling of answers - for regression testing +# +# no-shuffle=off + +################################# +# only-notify Only send AXFR NOTIFY to these IP addresses or netmasks +# +# only-notify=0.0.0.0/0,::/0 + +################################# +# out-of-zone-additional-processing Do out of zone additional processing +# +# out-of-zone-additional-processing=yes + +################################# +# overload-queue-length Maximum queuelength moving to packetcache only +# +# overload-queue-length=0 + +################################# +# pipebackend-abi-version Version of the pipe backend ABI +# +# pipebackend-abi-version=1 + +################################# +# prevent-self-notification Don't send notifications to what we think is ourself +# +# prevent-self-notification=yes + +################################# +# query-cache-ttl Seconds to store query results in the QueryCache +# +# query-cache-ttl=20 + +################################# +# query-local-address Source IP address for sending queries +# +# query-local-address=0.0.0.0 + +################################# +# query-local-address6 Source IPv6 address for sending queries +# +# query-local-address6=:: + +################################# +# query-logging Hint backends that queries should be logged +# +# query-logging=no + +################################# +# queue-limit Maximum number of milliseconds to queue a query +# +# queue-limit=1500 + +################################# +# receiver-threads Default number of receiver threads to start +# +# receiver-threads=1 + +################################# +# recursive-cache-ttl Seconds to store packets for recursive queries in the PacketCache +# +# recursive-cache-ttl=10 + +################################# +# recursor If recursion is desired, IP address of a recursing nameserver +# +# recursor=no + +################################# +# retrieval-threads Number of AXFR-retrieval threads for slave operation +# +# retrieval-threads=2 + +################################# +# reuseport Enable higher performance on compliant kernels by using SO_REUSEPORT allowing each receiver thread to open its own socket +# +# reuseport=no + +################################# +# security-poll-suffix Domain name from which to query security update notifications +# +# security-poll-suffix=secpoll.powerdns.com. + +################################# +# send-root-referral Send out old-fashioned root-referral instead of ServFail in case of no authority +# +# send-root-referral=no + +################################# +# server-id Returned when queried for 'server.id' TXT or NSID, defaults to hostname - disabled or custom +# +# server-id= + +################################# +# setgid If set, change group id to this gid for more security +# +setgid=pdns + +################################# +# setuid If set, change user id to this uid for more security +# +setuid=pdns + +################################# +# signing-threads Default number of signer threads to start +# +# signing-threads=3 + +################################# +# slave Act as a slave +# +# slave=no + +################################# +# slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds +# +# slave-cycle-interval=60 + +################################# +# slave-renotify If we should send out notifications for slaved updates +# +# slave-renotify=no + +################################# +# soa-expire-default Default SOA expire +# +# soa-expire-default=604800 + +################################# +# soa-minimum-ttl Default SOA minimum ttl +# +# soa-minimum-ttl=3600 + +################################# +# soa-refresh-default Default SOA refresh +# +# soa-refresh-default=10800 + +################################# +# soa-retry-default Default SOA retry +# +# soa-retry-default=3600 + +################################# +# socket-dir Where the controlsocket will live +# +# socket-dir=/var/run + +################################# +# tcp-control-address If set, PowerDNS can be controlled over TCP on this address +# +# tcp-control-address= + +################################# +# tcp-control-port If set, PowerDNS can be controlled over TCP on this address +# +# tcp-control-port=53000 + +################################# +# tcp-control-range If set, remote control of PowerDNS is possible over these networks only +# +# tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10 + +################################# +# tcp-control-secret If set, PowerDNS can be controlled over TCP after passing this secret +# +# tcp-control-secret= + +################################# +# traceback-handler Enable the traceback handler (Linux only) +# +# traceback-handler=yes + +################################# +# trusted-notification-proxy IP address of incoming notification proxy +# +# trusted-notification-proxy= + +################################# +# udp-truncation-threshold Maximum UDP response size before we truncate +# +# udp-truncation-threshold=1680 + +################################# +# version-string PowerDNS version in packets - full, anonymous, powerdns or custom +# + +version-string=powerdns +################################# +# webserver Start a webserver for monitoring +# +# webserver=no + +################################# +# webserver-address IP Address of webserver to listen on +# +# webserver-address=127.0.0.1 + +################################# +# webserver-allow-from Webserver access is only allowed from these subnets +# +# webserver-allow-from=0.0.0.0/0,::/0 + +################################# +# webserver-password Password required for accessing the webserver +# +# webserver-password= + +################################# +# webserver-port Port of webserver to listen on +# +# webserver-port=8081 + +################################# +# webserver-print-arguments If the webserver should print arguments +# +# webserver-print-arguments=no + +include-dir=/etc/powerdns/froxlor +]]> + + + + + + + + + + - + - + + + + + + + + + + + + + - + + + + + + + + + + + + + + - + + + + + +################################# +# allow-recursion List of netmasks that are allowed to recurse +# +allow-recursion=127.0.0.1 + +################################# +# allow-recursion-override Local data even about hosts that don't exist will +# override the internet. (on/off) +# +# allow-recursion-override= + +################################# +# cache-ttl Seconds to store packets in the PacketCache +# +# cache-ttl=20 + +################################# +# chroot If set, chroot to this directory for more security +# +# chroot=/var/spool/powerdns + +################################# +# config-dir Location of configuration directory (pdns.conf) +# +config-dir=/etc/powerdns + +################################# +# config-name Name of this virtual configuration - will rename the binary image +# +# config-name= + +################################# +# control-console Debugging switch - don't use +# +# control-console=no + +################################# +# daemon Operate as a daemon +# +daemon=yes + +################################# +# default-soa-name name to insert in the SOA record if none set in the backend +# +# default-soa-name=a.misconfigured.powerdns.server + +################################# +# disable-axfr Disable zonetransfers but do allow TCP queries +# +disable-axfr=yes + +################################# +# disable-tcp Do not listen to TCP queries +# +# disable-tcp=no + +################################# +# distributor-threads Default number of Distributor (backend) threads to start +# +# distributor-threads=3 + +################################# +# fancy-records Process URL and MBOXFW records +# +# fancy-records=no + +################################# +# guardian Run within a guardian process +# +guardian=yes + +################################# +# launch Which backends to launch and order to query them in +# +# launch= + +################################# +# lazy-recursion Only recurse if question cannot be answered locally +# +lazy-recursion=yes + +################################# +# load-modules Load this module - supply absolute or relative path +# +# load-modules= + +################################# +# local-address Local IP address to which we bind +# +local-address=,127.0.0.1 + +################################# +# local-ipv6 Local IP address to which we bind +# +# local-ipv6= + +################################# +# local-port The port on which we listen +# +local-port=53 + +################################# +# log-dns-details If PDNS should log failed update requests +# +log-dns-details=yes + +################################# +# log-failed-updates If PDNS should log failed update requests +# +# log-failed-updates= + +################################# +# logfile Logfile to use +# +# logfile=/var/log/pdns.log + +################################# +# logging-facility Log under a specific facility +# +# logging-facility= + +################################# +# loglevel Amount of logging. Higher is more. Do not set below 3 +# +# loglevel=4 + +################################# +# master Act as a master +# +master=yes + +################################# +# max-queue-length Maximum queuelength before considering situation lost +# +# max-queue-length=5000 + +################################# +# max-tcp-connections Maximum number of TCP connections +# +# max-tcp-connections=10 + +################################# +# module-dir Default directory for modules +# +module-dir=/usr/lib/powerdns + +################################# +# negquery-cache-ttl Seconds to store packets in the PacketCache +# +# negquery-cache-ttl=60 + +################################# +# out-of-zone-additional-processing Do out of zone additional processing +# +# out-of-zone-additional-processing=no + +################################# +# query-cache-ttl Seconds to store packets in the PacketCache +# +# query-cache-ttl=20 + +################################# +# query-logging Hint backends that queries should be logged +# +# query-logging=no + +################################# +# queue-limit Maximum number of milliseconds to queue a query +# +# queue-limit=1500 + +################################# +# query-local-address The IP address to use as a source address for sending +# queries. +# query-local-address= + +################################# +# receiver-threads Number of receiver threads to launch +# +# receiver-threads=1 + +################################# +# recursive-cache-ttl Seconds to store packets in the PacketCache +# +# recursive-cache-ttl=10 + +################################# +# recursor If recursion is desired, IP address of a recursing nameserver +# +# recursor= + +################################# +# setgid If set, change group id to this gid for more security +# +setgid=pdns + +################################# +# setuid If set, change user id to this uid for more security +# +setuid=pdns + +################################# +# skip-cname Do not perform CNAME indirection for each query +# +# skip-cname=no + +################################# +# slave Act as a slave +# +# slave=no + +################################# +# slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds +# +# slave-cycle-interval=60 + +################################# +# smtpredirector Our smtpredir MX host +# +# smtpredirector=a.misconfigured.powerdns.smtp.server + +################################# +# soa-minimum-ttl Default SOA mininum ttl +# +# soa-minimum-ttl=3600 + +################################# +# soa-refresh-default Default SOA refresh +# +# soa-refresh-default=10800 + +################################# +# soa-retry-default Default SOA retry +# +# soa-retry-default=3600 + +################################# +# soa-expire-default Default SOA expire +# +# soa-expire-default=604800 + +################################# +# soa-serial-offset Make sure that no SOA serial is less than this number +# +# soa-serial-offset=0 + +################################# +# socket-dir Where the controlsocket will live +# +socket-dir=/var/run + +################################# +# strict-rfc-axfrs Perform strictly rfc compliant axfrs (very slow) +# +# strict-rfc-axfrs=no + +################################# +# urlredirector Where we send hosts to that need to be url redirected +# +# urlredirector=127.0.0.1 + +################################# +# use-logfile Use a log file +# +# use-logfile=yes + +################################# +# webserver Start a webserver for monitoring +# +# webserver=no + +################################# +# webserver-address IP Address of webserver to listen on +# +# webserver-address=127.0.0.1 + +################################# +# webserver-password Password required for accessing the webserver +# +# webserver-password= + +################################# +# webserver-port Port of webserver to listen on +# +# webserver-port=8081 + +################################# +# webserver-print-arguments If the webserver should print arguments +# +# webserver-print-arguments=no + +################################# +# wildcard-url Process URL and MBOXFW records +# +# wildcard-url=no + +################################# +# wildcards Honor wildcards in the database +# +# wildcards= + +################################# +# version-string What should PowerDNS return for version +# allowed methods are anonymous / powerdns / full / custom +version-string=powerdns + +include-dir=/etc/powerdns/froxlor +]]> + + + + + + + + + + _logger->logAction(CRON_ACTION, LOG_ERROR, 'PowerDNS configuration file not found. Did you go through the configuration templates?'); - die('PowerDNS configuration file not found. Did you go through the configuration templates?'); + $this->_logger->logAction(CRON_ACTION, LOG_ERROR, 'PowerDNS configuration file ('.$config.') not found. Did you go through the configuration templates?'); + die('PowerDNS configuration file ('.$config.') not found. Did you go through the configuration templates?'.PHP_EOL); } $lines = file($config); $mysql_data = array();