From 5e60b96cd6ce6f5fc1f9bf9ad7e893bc3a92fcfc Mon Sep 17 00:00:00 2001 From: "Michael Kaufmann (d00p)" Date: Wed, 29 Jul 2015 14:56:06 +0200 Subject: [PATCH] add tentative jessie config xml file, testers are welcome Signed-off-by: Michael Kaufmann (d00p) --- lib/configfiles/jessie.xml | 3846 ++++++++++++++++++++++++++++++++++++ 1 file changed, 3846 insertions(+) create mode 100644 lib/configfiles/jessie.xml diff --git a/lib/configfiles/jessie.xml b/lib/configfiles/jessie.xml new file mode 100644 index 00000000..c50d4a33 --- /dev/null +++ b/lib/configfiles/jessie.xml @@ -0,0 +1,3846 @@ + + + + + + + + + + + {{settings.system.apacheconf_vhost}} + + + + + {{settings.system.apacheconf_vhost}} + + + + + + + {{settings.system.apacheconf_diroptions}} + + + + + {{settings.system.apacheconf_diroptions}} + + + + + + + + + + + {{settings.system.deactivateddocroot}} + + + + + + + + + + //service[@type='http']/general/commands + + {{settings.phpfpm.enabled}} + + + + + {{settings.phpfpm.enabled}} + + + FastCgiIpcDir + + + Require all granted + Require env REDIRECT_STATUS + + +]]> + + + + + + + + + + + + //service[@type='http']/general/commands + + {{settings.system.apacheconf_vhost}} + + > /etc/lighttpd/lighttpd.conf]]> + + + {{settings.system.apacheconf_vhost}} + + > /etc/lighttpd/lighttpd.conf]]> + + + {{settings.system.apacheconf_diroptions}} + + > /etc/lighttpd/lighttpd.conf]]> + + + {{settings.system.apacheconf_diroptions}} + + > /etc/lighttpd/lighttpd.conf]]> + + + + + + + + + + {{settings.phpfpm.enabled}} + + {{settings.system.mod_fcgid}} + + + + + + + + + + + + + {{settings.phpfpm.enabled}} + + {{settings.system.mod_fcgid}} + + + + + //service[@type='http']/general/commands + + {{settings.phpfpm.enabled}} + + {{settings.system.mod_fcgid}} + + + + + + + + + + + + > /etc/bind/named.conf.local]]> + + + + + + + + + + +################################# +# allow-recursion List of netmasks that are allowed to recurse +# +allow-recursion=127.0.0.1 + +################################# +# allow-recursion-override Local data even about hosts that don't exist will +# override the internet. (on/off) +# +# allow-recursion-override= + +################################# +# cache-ttl Seconds to store packets in the PacketCache +# +# cache-ttl=20 + +################################# +# chroot If set, chroot to this directory for more security +# +# chroot=/var/spool/powerdns + +################################# +# config-dir Location of configuration directory (pdns.conf) +# +config-dir=/etc/powerdns + +################################# +# config-name Name of this virtual configuration - will rename the binary image +# +# config-name= + +################################# +# control-console Debugging switch - don't use +# +# control-console=no + +################################# +# daemon Operate as a daemon +# +daemon=yes + +################################# +# default-soa-name name to insert in the SOA record if none set in the backend +# +# default-soa-name=a.misconfigured.powerdns.server + +################################# +# disable-axfr Disable zonetransfers but do allow TCP queries +# +disable-axfr=yes + +################################# +# disable-tcp Do not listen to TCP queries +# +# disable-tcp=no + +################################# +# distributor-threads Default number of Distributor (backend) threads to start +# +# distributor-threads=3 + +################################# +# fancy-records Process URL and MBOXFW records +# +# fancy-records=no + +################################# +# guardian Run within a guardian process +# +guardian=yes + +################################# +# launch Which backends to launch and order to query them in +# +launch=bind + +################################# +# lazy-recursion Only recurse if question cannot be answered locally +# +lazy-recursion=yes + +################################# +# load-modules Load this module - supply absolute or relative path +# +# load-modules= + +################################# +# local-address Local IP address to which we bind +# +local-address=,127.0.0.1 + +################################# +# local-ipv6 Local IP address to which we bind +# +# local-ipv6= + +################################# +# local-port The port on which we listen +# +local-port=53 + +################################# +# log-dns-details If PDNS should log failed update requests +# +log-dns-details=yes + +################################# +# log-failed-updates If PDNS should log failed update requests +# +# log-failed-updates= + +################################# +# logfile Logfile to use +# +# logfile=/var/log/pdns.log + +################################# +# logging-facility Log under a specific facility +# +# logging-facility= + +################################# +# loglevel Amount of logging. Higher is more. Do not set below 3 +# +# loglevel=4 + +################################# +# master Act as a master +# +master=yes + +################################# +# max-queue-length Maximum queuelength before considering situation lost +# +# max-queue-length=5000 + +################################# +# max-tcp-connections Maximum number of TCP connections +# +# max-tcp-connections=10 + +################################# +# module-dir Default directory for modules +# +module-dir=/usr/lib/powerdns + +################################# +# negquery-cache-ttl Seconds to store packets in the PacketCache +# +# negquery-cache-ttl=60 + +################################# +# out-of-zone-additional-processing Do out of zone additional processing +# +# out-of-zone-additional-processing=no + +################################# +# query-cache-ttl Seconds to store packets in the PacketCache +# +# query-cache-ttl=20 + +################################# +# query-logging Hint backends that queries should be logged +# +# query-logging=no + +################################# +# queue-limit Maximum number of milliseconds to queue a query +# +# queue-limit=1500 + +################################# +# query-local-address The IP address to use as a source address for sending +# queries. +# query-local-address= + +################################# +# receiver-threads Number of receiver threads to launch +# +# receiver-threads=1 + +################################# +# recursive-cache-ttl Seconds to store packets in the PacketCache +# +# recursive-cache-ttl=10 + +################################# +# recursor If recursion is desired, IP address of a recursing nameserver +# +# recursor= + +################################# +# setgid If set, change group id to this gid for more security +# +setgid=pdns + +################################# +# setuid If set, change user id to this uid for more security +# +setuid=pdns + +################################# +# skip-cname Do not perform CNAME indirection for each query +# +# skip-cname=no + +################################# +# slave Act as a slave +# +# slave=no + +################################# +# slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds +# +# slave-cycle-interval=60 + +################################# +# smtpredirector Our smtpredir MX host +# +# smtpredirector=a.misconfigured.powerdns.smtp.server + +################################# +# soa-minimum-ttl Default SOA mininum ttl +# +# soa-minimum-ttl=3600 + +################################# +# soa-refresh-default Default SOA refresh +# +# soa-refresh-default=10800 + +################################# +# soa-retry-default Default SOA retry +# +# soa-retry-default=3600 + +################################# +# soa-expire-default Default SOA expire +# +# soa-expire-default=604800 + +################################# +# soa-serial-offset Make sure that no SOA serial is less than this number +# +# soa-serial-offset=0 + +################################# +# socket-dir Where the controlsocket will live +# +socket-dir=/var/run + +################################# +# strict-rfc-axfrs Perform strictly rfc compliant axfrs (very slow) +# +# strict-rfc-axfrs=no + +################################# +# urlredirector Where we send hosts to that need to be url redirected +# +# urlredirector=127.0.0.1 + +################################# +# use-logfile Use a log file +# +# use-logfile=yes + +################################# +# webserver Start a webserver for monitoring +# +# webserver=no + +################################# +# webserver-address IP Address of webserver to listen on +# +# webserver-address=127.0.0.1 + +################################# +# webserver-password Password required for accessing the webserver +# +# webserver-password= + +################################# +# webserver-port Port of webserver to listen on +# +# webserver-port=8081 + +################################# +# webserver-print-arguments If the webserver should print arguments +# +# webserver-print-arguments=no + +################################# +# wildcard-url Process URL and MBOXFW records +# +# wildcard-url=no + +################################# +# wildcards Honor wildcards in the database +# +# wildcards= + +################################# +# version-string What should PowerDNS return for version +# allowed methods are anonymous / powerdns / full / custom +version-string=powerdns + +include=/etc/powerdns/pdns.d +]]> + + + + named.conf + +# How often to check for zone changes. See 'Operation' section. +bind-check-interval=180 + +# Uncomment to enable Huffman compression on zone data. +# Currently saves around 20% of memory actually used, but slows down operation. +# bind-enable-huffman +]]> + + + + + + + + + + + + {{settings.system.vmail_gid}} + + + + + {{settings.system.vmail_uid}} + + + + + + + + + + + + + + + + + +password = +dbname = +hosts = +query = SELECT destination FROM mail_virtual WHERE email = '%s' AND trim(destination) <> '' +]]> + + + + +password = +dbname = +hosts = +query = SELECT domain FROM panel_domains WHERE domain = '%s' AND isemaildomain = '1' +]]> + + + + +password = +dbname = +expansion_limit = 1 +hosts = +query = SELECT CONCAT(homedir,maildir) FROM mail_users WHERE email = '%s' +]]> + + + + +password = +dbname = +hosts = +query = SELECT DISTINCT username FROM mail_users WHERE email in ((SELECT mail_virtual.email_full FROM mail_virtual WHERE mail_virtual.email = '%s' UNION SELECT mail_virtual.destination FROM mail_virtual WHERE mail_virtual.email = '%s')); +]]> + + + + +password = +dbname = +expansion_limit = 1 +hosts = +query = SELECT uid FROM mail_users WHERE email = '%s' +]]> + + + + +password = +dbname = +expansion_limit = 1 +hosts = +query = SELECT gid FROM mail_users WHERE email = '%s' +]]> + + + + +]]> + + + + + + + + + + + //service[@type='smtp']/general/commands[@index=1] + + //service[@type='smtp']/general/installs[@index=1] + + //service[@type='smtp']/general/commands[@index=2] + + + + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +# Debian GNU/Linux specific: Specifying a file name will cause the +# first line of that file to be used as the name. The Debian default +# is /etc/mailname. +# +#myorigin = /etc/mailname +#myorigin = $myhostname +#myorigin = $mydomain + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +#mydestination = $myhostname, localhost.$mydomain, localhost +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table +mynetworks = 127.0.0.0/8 + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +#alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +#alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +#recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /usr/bin/procmail +#mailbox_command = /usr/bin/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" +# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. +#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp +# +# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and +# subsequent line in master.cf. +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/file/name +#fallback_transport = cyrus +#fallback_transport = + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) +smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) + + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +#debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = + +# readme_directory: The location of the Postfix README files. +# +readme_directory = +inet_protocols = ipv4 + +append_dot_mydomain = no +biff = no +smtpd_helo_required = yes +smtpd_recipient_restrictions = permit_mynetworks, + permit_sasl_authenticated, + reject_unauth_destination, + reject_unauth_pipelining, + reject_non_fqdn_recipient +smtpd_sender_restrictions = permit_mynetworks, + reject_sender_login_mismatch, + permit_sasl_authenticated, + reject_unknown_helo_hostname, + reject_unknown_recipient_domain, + reject_unknown_sender_domain +smtpd_client_restrictions = permit_mynetworks, + permit_sasl_authenticated, + reject_unknown_client_hostname + +# Postfix 2.10 requires this option. Postfix < 2.10 ignores this. +# The option is intentionally left empty. +smtpd_relay_restrictions = + +# Maximum size of Message in bytes (50MB) +message_size_limit = 52428800 + +## SASL Auth Settings +smtpd_sasl_auth_enable = yes +smtpd_sasl_local_domain = $myhostname +broken_sasl_auth_clients = yes +## Dovecot Settings for deliver, SASL Auth and virtual transport +smtpd_sasl_type = dovecot +virtual_transport = dovecot +dovecot_destination_recipient_limit = 1 +smtpd_sasl_path = private/auth + +# Virtual delivery settings +virtual_mailbox_base = +virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual_mailbox_maps.cf +virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual_mailbox_domains.cf +virtual_alias_maps = mysql:/etc/postfix/mysql-virtual_alias_maps.cf +smtpd_sender_login_maps = mysql:/etc/postfix/mysql-virtual_sender_permissions.cf +virtual_uid_maps = static: +virtual_gid_maps = static: + +# Local delivery settings +local_transport = local +alias_maps = $alias_database + +# Default Mailbox size, is set to 0 which means unlimited! +mailbox_size_limit = 0 +virtual_mailbox_limit = 0 + +### TLS settings +### +## TLS for outgoing mails from the server to another server +#smtp_tls_security_level = may +#smtp_tls_note_starttls_offer = yes +## TLS for incoming connections (clients or other mail servers) +#smtpd_tls_security_level = may +#smtpd_tls_cert_file = /etc/ssl/server/.pem +#smtpd_tls_key_file = $smtpd_tls_cert_file +#smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt +#smtpd_tls_loglevel = 1 +#smtpd_tls_received_header = yes +]]> + + + //service[@type='smtp']/general/files[@index=0] + + + + + //service[@type='smtp']/general/commands[@index=3] + + + + + + + + + + + + + to select which instance is used (an alternative +# to -c ). The instance name is also added to Dovecot processes +# in ps output. +#instance_name = dovecot + +# Greeting message for clients. +#login_greeting = Dovecot ready. + +# Space separated list of trusted network ranges. Connections from these +# IPs are allowed to override their IP addresses and ports (for logging and +# for authentication checks). disable_plaintext_auth is also ignored for +# these networks. Typically you'd specify your IMAP proxy servers here. +#login_trusted_networks = + +# Space separated list of login access check sockets (e.g. tcpwrap) +#login_access_sockets = + +# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do +# proxying. This isn't necessary normally, but may be useful if the destination +# IP is e.g. a load balancer's IP. +#auth_proxy_self = + +# Show more verbose process titles (in ps). Currently shows user name and +# IP address. Useful for seeing who are actually using the IMAP processes +# (eg. shared mailboxes or if same uid is used for multiple accounts). +#verbose_proctitle = no + +# Should all processes be killed when Dovecot master process shuts down. +# Setting this to "no" means that Dovecot can be upgraded without +# forcing existing client connections to close (although that could also be +# a problem if the upgrade is e.g. because of a security fix). +#shutdown_clients = yes + +# If non-zero, run mail commands via this many connections to doveadm server, +# instead of running them directly in the same process. +#doveadm_worker_count = 0 +# UNIX socket or host:port used for connecting to doveadm server +#doveadm_socket_path = doveadm-server + +# Space separated list of environment variables that are preserved on Dovecot +# startup and passed down to all of its child processes. You can also give +# key=value pairs to always set specific settings. +#import_environment = TZ + +## +## Dictionary server settings +## + +# Dictionary can be used to store key=value lists. This is used by several +# plugins. The dictionary can be accessed either directly or though a +# dictionary server. The following dict block maps dictionary names to URIs +# when the server is used. These can then be referenced using URIs in format +# "proxy::". + +dict { + #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext + #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext +} + +# Most of the actual configuration gets included below. The filenames are +# first sorted by their ASCII value and parsed in that order. The 00-prefixes +# in filenames are intended to make it easier to understand the ordering. +!include conf.d/*.conf + +# A config file can also tried to be included without giving an error if +# it's not found: +!include_try local.conf +]]> + + + + dbname= user= password= + +# Default password scheme. +# +# List of supported schemes is in +# http://wiki2.dovecot.org/Authentication/PasswordSchemes +# +default_pass_scheme = CRYPT + +# passdb query to retrieve the password. It can return fields: +# password - The user's password. This field must be returned. +# user - user@domain from the database. Needed with case-insensitive lookups. +# username and domain - An alternative way to represent the "user" field. +# +# The "user" field is often necessary with case-insensitive lookups to avoid +# e.g. "name" and "nAme" logins creating two different mail directories. If +# your user and domain names are in separate fields, you can return "username" +# and "domain" fields instead of "user". +# +# The query can also return other fields which have a special meaning, see +# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields +# +# Commonly used available substitutions (see http://wiki2.dovecot.org/Variables +# for full list): +# %u = entire user@domain +# %n = user part of user@domain +# %d = domain part of user@domain +# +# Note that these can be used only as input to SQL query. If the query outputs +# any of these substitutions, they're not touched. Otherwise it would be +# difficult to have eg. usernames containing '%' characters. +# +# Example: +# password_query = SELECT userid AS user, pw AS password \ +# FROM users WHERE userid = '%u' AND active = 'Y' +# +#password_query = \ +# SELECT username, domain, password \ +# FROM users WHERE username = '%n' AND domain = '%d' + +# userdb query to retrieve the user information. It can return fields: +# uid - System UID (overrides mail_uid setting) +# gid - System GID (overrides mail_gid setting) +# home - Home directory +# mail - Mail location (overrides mail_location setting) +# +# None of these are strictly required. If you use a single UID and GID, and +# home or mail directory fits to a template string, you could use userdb static +# instead. For a list of all fields that can be returned, see +# http://wiki2.dovecot.org/UserDatabase/ExtraFields +# +# Examples: +# user_query = SELECT home, uid, gid FROM users WHERE userid = '%u' +# user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u' +# user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u' +# +#user_query = \ +# SELECT home, uid, gid \ +# FROM users WHERE username = '%n' AND domain = '%d' +user_query = SELECT CONCAT(homedir, maildir) AS home, CONCAT('maildir:', homedir, maildir) AS mail, uid, gid, CONCAT('*:storage=', (quota*1024)) as quota_rule FROM mail_users WHERE (username = '%u' OR email = '%u') + +# If you wish to avoid two SQL lookups (passdb + userdb), you can use +# userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll +# also have to return userdb fields in password_query prefixed with "userdb_" +# string. For example: +#password_query = \ +# SELECT userid AS user, password, \ +# home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \ +# FROM users WHERE userid = '%u' +password_query = SELECT username AS user, password_enc AS password, CONCAT(homedir, maildir) AS userdb_home, uid AS userdb_uid, gid AS userdb_gid, CONCAT('maildir:', homedir, maildir) AS userdb_mail, CONCAT('maildir:storage=', (quota*1024)) as userdb_quota FROM mail_users WHERE (username = '%u' OR email = '%u') AND ((imap = 1 AND '%Ls' = 'imap') OR (pop3 = 1 AND '%Ls' = 'pop3') OR '%Ls' = 'smtp' OR '%Ls' = 'sieve') + +# Query to get a list of all usernames. +#iterate_query = SELECT username AS user FROM users +]]> + + + + to characters. For example "#@/@" means +# that '#' and '/' characters are translated to '@'. +#auth_username_translation = + +# Username formatting before it's looked up from databases. You can use +# the standard variables here, eg. %Lu would lowercase the username, %n would +# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into +# "-AT-". This translation is done after auth_username_translation changes. +#auth_username_format = %Lu + +# If you want to allow master users to log in by specifying the master +# username within the normal username string (ie. not using SASL mechanism's +# support for it), you can specify the separator character here. The format +# is then . UW-IMAP uses "*" as the +# separator, so that could be a good choice. +#auth_master_user_separator = + +# Username to use for users logging in with ANONYMOUS SASL mechanism +#auth_anonymous_username = anonymous + +# Maximum number of dovecot-auth worker processes. They're used to execute +# blocking passdb and userdb queries (eg. MySQL and PAM). They're +# automatically created and destroyed as needed. +#auth_worker_max_count = 30 + +# Host name to use in GSSAPI principal names. The default is to use the +# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab +# entries. +#auth_gssapi_hostname = + +# Kerberos keytab to use for the GSSAPI mechanism. Will use the system +# default (usually /etc/krb5.keytab) if not specified. You may need to change +# the auth service to run as root to be able to read this file. +#auth_krb5_keytab = + +# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and +# ntlm_auth helper. +#auth_use_winbind = no + +# Path for Samba's ntlm_auth helper binary. +#auth_winbind_helper_path = /usr/bin/ntlm_auth + +# Time to delay before replying to failed authentications. +#auth_failure_delay = 2 secs + +# Require a valid SSL client certificate or the authentication fails. +#auth_ssl_require_client_cert = no + +# Take the username from client's SSL certificate, using +# X509_NAME_get_text_by_NID() which returns the subject's DN's +# CommonName. +#auth_ssl_username_from_cert = no + +# Space separated list of wanted authentication mechanisms: +# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey +# gss-spnego +# NOTE: See also disable_plaintext_auth setting. +auth_mechanisms = plain login + +## +## Password and user databases +## + +# +# Password database is used to verify user's password (and nothing more). +# You can have multiple passdbs and userdbs. This is useful if you want to +# allow both system users (/etc/passwd) and virtual users to login without +# duplicating the system users into virtual database. +# +# +# +# User database specifies where mails are located and what user/group IDs +# own them. For single-UID configuration use "static" userdb. +# +# + +#!include auth-deny.conf.ext +#!include auth-master.conf.ext + +#!include auth-system.conf.ext +!include auth-sql.conf.ext +#!include auth-ldap.conf.ext +#!include auth-passwdfile.conf.ext +#!include auth-checkpassword.conf.ext +#!include auth-vpopmail.conf.ext +#!include auth-static.conf.ext +]]> + + + + +# +mail_location = mbox:~/mail:INBOX=/var/mail/%u + +# If you need to set multiple mailbox locations or want to change default +# namespace settings, you can do it by defining namespace sections. +# +# You can have private, shared and public namespaces. Private namespaces +# are for user's personal mails. Shared namespaces are for accessing other +# users' mailboxes that have been shared. Public namespaces are for shared +# mailboxes that are managed by sysadmin. If you create any shared or public +# namespaces you'll typically want to enable ACL plugin also, otherwise all +# users can access all the shared mailboxes, assuming they have permissions +# on filesystem level to do so. +namespace inbox { + # Namespace type: private, shared or public + #type = private + + # Hierarchy separator to use. You should use the same separator for all + # namespaces or some clients get confused. '/' is usually a good one. + # The default however depends on the underlying mail storage format. + #separator = + + # Prefix required to access this namespace. This needs to be different for + # all namespaces. For example "Public/". + #prefix = + + # Physical location of the mailbox. This is in same format as + # mail_location, which is also the default for it. + #location = + + # There can be only one INBOX, and this setting defines which namespace + # has it. + inbox = yes + + # If namespace is hidden, it's not advertised to clients via NAMESPACE + # extension. You'll most likely also want to set list=no. This is mostly + # useful when converting from another server with different namespaces which + # you want to deprecate but still keep working. For example you can create + # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/". + #hidden = no + + # Show the mailboxes under this namespace with LIST command. This makes the + # namespace visible for clients that don't support NAMESPACE extension. + # "children" value lists child mailboxes, but hides the namespace prefix. + #list = yes + + # Namespace handles its own subscriptions. If set to "no", the parent + # namespace handles them (empty prefix should always have this as "yes") + #subscriptions = yes +} + +# Example shared namespace configuration +#namespace { + #type = shared + #separator = / + + # Mailboxes are visible under "shared/user@domain/" + # %%n, %%d and %%u are expanded to the destination user. + #prefix = shared/%%u/ + + # Mail location for other users' mailboxes. Note that %variables and ~/ + # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the + # destination user's data. + #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u + + # Use the default namespace for saving subscriptions. + #subscriptions = no + + # List the shared/ namespace only if there are visible shared mailboxes. + #list = children +#} +# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"? +#mail_shared_explicit_inbox = no + +# System user and group used to access mails. If you use multiple, userdb +# can override these by returning uid or gid fields. You can use either numbers +# or names. +#mail_uid = +#mail_gid = + +# Group to enable temporarily for privileged operations. Currently this is +# used only with INBOX when either its initial creation or dotlocking fails. +# Typically this is set to "mail" to give access to /var/mail. +#mail_privileged_group = + +# Grant access to these supplementary groups for mail processes. Typically +# these are used to set up access to shared mailboxes. Note that it may be +# dangerous to set these if users can create symlinks (e.g. if "mail" group is +# set here, ln -s /var/mail ~/mail/var could allow a user to delete others' +# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it). +mail_access_groups = vmail + +# Allow full filesystem access to clients. There's no access checks other than +# what the operating system does for the active UID/GID. It works with both +# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ +# or ~user/. +#mail_full_filesystem_access = no + +# Dictionary for key=value mailbox attributes. Currently used by URLAUTH, but +# soon intended to be used by METADATA as well. +#mail_attribute_dict = + +## +## Mail processes +## + +# Don't use mmap() at all. This is required if you store indexes to shared +# filesystems (NFS or clustered filesystem). +#mmap_disable = no + +# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL +# since version 3, so this should be safe to use nowadays by default. +#dotlock_use_excl = yes + +# When to use fsync() or fdatasync() calls: +# optimized (default): Whenever necessary to avoid losing important data +# always: Useful with e.g. NFS when write()s are delayed +# never: Never use it (best performance, but crashes can lose data) +#mail_fsync = optimized + +# Locking method for index files. Alternatives are fcntl, flock and dotlock. +# Dotlocking uses some tricks which may create more disk I/O than other locking +# methods. NFS users: flock doesn't work, remember to change mmap_disable. +#lock_method = fcntl + +# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB. +#mail_temp_dir = /tmp + +# Valid UID range for users, defaults to 500 and above. This is mostly +# to make sure that users can't log in as daemons or other system users. +# Note that denying root logins is hardcoded to dovecot binary and can't +# be done even if first_valid_uid is set to 0. +#first_valid_uid = 500 +#last_valid_uid = 0 + +# Valid GID range for users, defaults to non-root/wheel. Users having +# non-valid GID as primary group ID aren't allowed to log in. If user +# belongs to supplementary groups with non-valid GIDs, those groups are +# not set. +#first_valid_gid = 1 +#last_valid_gid = 0 + +# Maximum allowed length for mail keyword name. It's only forced when trying +# to create new keywords. +#mail_max_keyword_length = 50 + +# ':' separated list of directories under which chrooting is allowed for mail +# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). +# This setting doesn't affect login_chroot, mail_chroot or auth chroot +# settings. If this setting is empty, "/./" in home dirs are ignored. +# WARNING: Never add directories here which local users can modify, that +# may lead to root exploit. Usually this should be done only if you don't +# allow shell access for users. +#valid_chroot_dirs = + +# Default chroot directory for mail processes. This can be overridden for +# specific users in user database by giving /./ in user's home directory +# (eg. /home/./user chroots into /home). Note that usually there is no real +# need to do chrooting, Dovecot doesn't allow users to access files outside +# their mail directory anyway. If your home directories are prefixed with +# the chroot directory, append "/." to mail_chroot. +#mail_chroot = + +# UNIX socket path to master authentication server to find users. +# This is used by imap (for shared users) and lda. +#auth_socket_path = /var/run/dovecot/auth-userdb + +# Directory where to look up mail plugins. +#mail_plugin_dir = /usr/lib/dovecot/modules + +# Space separated list of plugins to load for all services. Plugins specific to +# IMAP, LDA, etc. are added to this list in their own .conf files. +#mail_plugins = + +## +## Mailbox handling optimizations +## + +# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are +# also required for IMAP NOTIFY extension to be enabled. +#mailbox_list_index = no + +# The minimum number of mails in a mailbox before updates are done to cache +# file. This allows optimizing Dovecot's behavior to do less disk writes at +# the cost of more disk reads. +#mail_cache_min_mail_count = 0 + +# When IDLE command is running, mailbox is checked once in a while to see if +# there are any new mails or other changes. This setting defines the minimum +# time to wait between those checks. Dovecot can also use dnotify, inotify and +# kqueue to find out immediately when changes occur. +#mailbox_idle_check_interval = 30 secs + +# Save mails with CR+LF instead of plain LF. This makes sending those mails +# take less CPU, especially with sendfile() syscall with Linux and FreeBSD. +# But it also creates a bit more disk I/O which may just make it slower. +# Also note that if other software reads the mboxes/maildirs, they may handle +# the extra CRs wrong and cause problems. +#mail_save_crlf = no + +# Max number of mails to keep open and prefetch to memory. This only works with +# some mailbox formats and/or operating systems. +#mail_prefetch_count = 0 + +# How often to scan for stale temporary files and delete them (0 = never). +# These should exist only after Dovecot dies in the middle of saving mails. +#mail_temp_scan_interval = 1w + +## +## Maildir-specific settings +## + +# By default LIST command returns all entries in maildir beginning with a dot. +# Enabling this option makes Dovecot return only entries which are directories. +# This is done by stat()ing each entry, so it causes more disk I/O. +# (For systems setting struct dirent->d_type, this check is free and it's +# done always regardless of this setting) +#maildir_stat_dirs = no + +# When copying a message, do it with hard links whenever possible. This makes +# the performance much better, and it's unlikely to have any side effects. +#maildir_copy_with_hardlinks = yes + +# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only +# when its mtime changes unexpectedly or when we can't find the mail otherwise. +#maildir_very_dirty_syncs = no + +# If enabled, Dovecot doesn't use the S= in the Maildir filenames for +# getting the mail's physical size, except when recalculating Maildir++ quota. +# This can be useful in systems where a lot of the Maildir filenames have a +# broken size. The performance hit for enabling this is very small. +#maildir_broken_filename_sizes = no + +# Always move mails from new/ directory to cur/, even when the \Recent flags +# aren't being reset. +#maildir_empty_new = no + +## +## mbox-specific settings +## + +# Which locking methods to use for locking mbox. There are four available: +# dotlock: Create .lock file. This is the oldest and most NFS-safe +# solution. If you want to use /var/mail/ like directory, the users +# will need write access to that directory. +# dotlock_try: Same as dotlock, but if it fails because of permissions or +# because there isn't enough disk space, just skip it. +# fcntl : Use this if possible. Works with NFS too if lockd is used. +# flock : May not exist in all systems. Doesn't work with NFS. +# lockf : May not exist in all systems. Doesn't work with NFS. +# +# You can use multiple locking methods; if you do the order they're declared +# in is important to avoid deadlocks if other MTAs/MUAs are using multiple +# locking methods as well. Some operating systems don't allow using some of +# them simultaneously. +# +# The Debian value for mbox_write_locks differs from upstream Dovecot. It is +# changed to be compliant with Debian Policy (section 11.6) for NFS safety. +# Dovecot: mbox_write_locks = dotlock fcntl +# Debian: mbox_write_locks = fcntl dotlock +# +#mbox_read_locks = fcntl +#mbox_write_locks = fcntl dotlock + +# Maximum time to wait for lock (all of them) before aborting. +#mbox_lock_timeout = 5 mins + +# If dotlock exists but the mailbox isn't modified in any way, override the +# lock file after this much time. +#mbox_dotlock_change_timeout = 2 mins + +# When mbox changes unexpectedly we have to fully read it to find out what +# changed. If the mbox is large this can take a long time. Since the change +# is usually just a newly appended mail, it'd be faster to simply read the +# new mails. If this setting is enabled, Dovecot does this but still safely +# fallbacks to re-reading the whole mbox file whenever something in mbox isn't +# how it's expected to be. The only real downside to this setting is that if +# some other MUA changes message flags, Dovecot doesn't notice it immediately. +# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK +# commands. +#mbox_dirty_syncs = yes + +# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, +# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. +#mbox_very_dirty_syncs = no + +# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK +# commands and when closing the mailbox). This is especially useful for POP3 +# where clients often delete all mails. The downside is that our changes +# aren't immediately visible to other MUAs. +#mbox_lazy_writes = yes + +# If mbox size is smaller than this (e.g. 100k), don't write index files. +# If an index file already exists it's still read, just not updated. +#mbox_min_index_size = 0 + +# Mail header selection algorithm to use for MD5 POP3 UIDLs when +# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired +# algorithm, but it fails if the first Received: header isn't unique in all +# mails. An alternative algorithm is "all" that selects all headers. +#mbox_md5 = apop3d + +## +## mdbox-specific settings +## + +# Maximum dbox file size until it's rotated. +#mdbox_rotate_size = 2M + +# Maximum dbox file age until it's rotated. Typically in days. Day begins +# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled. +#mdbox_rotate_interval = 0 + +# When creating new mdbox files, immediately preallocate their size to +# mdbox_rotate_size. This setting currently works only in Linux with some +# filesystems (ext4, xfs). +#mdbox_preallocate_space = no + +## +## Mail attachments +## + +# sdbox and mdbox support saving mail attachments to external files, which +# also allows single instance storage for them. Other backends don't support +# this for now. + +# Directory root where to store mail attachments. Disabled, if empty. +#mail_attachment_dir = + +# Attachments smaller than this aren't saved externally. It's also possible to +# write a plugin to disable saving specific attachments externally. +#mail_attachment_min_size = 128k + +# Filesystem backend to use for saving attachments: +# posix : No SiS done by Dovecot (but this might help FS's own deduplication) +# sis posix : SiS with immediate byte-by-byte comparison during saving +# sis-queue posix : SiS with delayed comparison and deduplication +#mail_attachment_fs = sis posix + +# Hash format to use in attachment filenames. You can add any text and +# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}. +# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits +#mail_attachment_hash = %{sha1} +]]> + + + + + #service_count = 1 + + # Number of processes to always keep waiting for more connections. + #process_min_avail = 0 + + # If you set service_count=0, you probably need to grow this. + #vsz_limit = $default_vsz_limit +} + +service pop3-login { + inet_listener pop3 { + #port = 110 + } + inet_listener pop3s { + #port = 995 + #ssl = yes + } +} + +service lmtp { + unix_listener lmtp { + #mode = 0666 + } + + # Create inet listener only if you can't use the above UNIX socket + #inet_listener lmtp { + # Avoid making LMTP visible for the entire internet + #address = + #port = + #} +} + +service imap { + # Most of the memory goes to mmap()ing files. You may need to increase this + # limit if you have huge mailboxes. + #vsz_limit = $default_vsz_limit + + # Max. number of IMAP processes (connections) + #process_limit = 1024 +} + +service pop3 { + # Max. number of POP3 processes (connections) + #process_limit = 1024 +} + +service auth { + # auth_socket_path points to this userdb socket by default. It's typically + # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have + # full permissions to this socket are able to get a list of all usernames and + # get the results of everyone's userdb lookups. + # + # The default 0666 mode allows anyone to connect to the socket, but the + # userdb lookups will succeed only if the userdb returns an "uid" field that + # matches the caller process's UID. Also if caller's uid or gid matches the + # socket's uid or gid the lookup succeeds. Anything else causes a failure. + # + # To give the caller full permissions to lookup all users, set the mode to + # something else than 0666 and Dovecot lets the kernel enforce the + # permissions (e.g. 0777 allows everyone full permissions). + unix_listener auth-userdb { + #mode = 0666 + #user = + #group = + } + + # Postfix smtp-auth + unix_listener /var/spool/postfix/private/auth { + mode = 0660 + user = postfix + group = postfix + } + + # Exim4 smtp-auth + unix_listener auth-client { + mode = 0660 + user = mail + group = Debian-exim + } + + # Auth process is run as this user. + #user = $default_internal_user +} + +service auth-worker { + # Auth worker process is run as root by default, so that it can access + # /etc/shadow. If this isn't necessary, the user should be changed to + # $default_internal_user. + #user = root +} + +service dict { + # If dict proxy is used, mail processes should have access to its socket. + # For example: mode=0660, group=vmail and global mail_access_groups=vmail + unix_listener dict { + #mode = 0600 + #user = + #group = + } +} +]]> + + + + . %d expands to recipient domain. +postmaster_address = postmaster@ + +# Hostname to use in various parts of sent mails (e.g. in Message-Id) and +# in LMTP replies. Default is the system's real hostname@domain. +#hostname = + +# If user is over quota, return with temporary failure instead of +# bouncing the mail. +#quota_full_tempfail = no + +# Binary to use for sending mails. +#sendmail_path = /usr/sbin/sendmail + +# If non-empty, send mails via this SMTP host[:port] instead of sendmail. +#submission_host = + +# Subject: header to use for rejection mails. You can use the same variables +# as for rejection_reason below. +#rejection_subject = Rejected: %s + +# Human readable error message for rejection mails. You can use variables: +# %n = CRLF, %r = reason, %s = original subject, %t = recipient +#rejection_reason = Your message to <%t> was automatically rejected:%n%r + +# Delimiter character between local-part and detail in email address. +#recipient_delimiter = + + +# Header where the original recipient address (SMTP's RCPT TO: address) is taken +# from if not available elsewhere. With dovecot-lda -a parameter overrides this. +# A commonly used header for this is X-Original-To. +#lda_original_recipient_header = + +# Should saving a mail to a nonexistent mailbox automatically create it? +#lda_mailbox_autocreate = no + +# Should automatically created mailboxes be also automatically subscribed? +#lda_mailbox_autosubscribe = no + +protocol lda { + # Space separated list of plugins to load (default is global mail_plugins). + mail_plugins = $mail_plugins quota sieve +} +]]> + + + + + + + + + #service_count = 1 + + # Number of processes to always keep waiting for more connections. + #process_min_avail = 0 + + # If you set service_count=0, you probably need to grow this. + #vsz_limit = 64M +#} + +#service managesieve { + # Max. number of ManageSieve processes (connections) + #process_limit = 1024 +#} + +# Service configuration + +protocol sieve { + # Maximum ManageSieve command line length in bytes. ManageSieve usually does + # not involve overly long command lines, so this setting will not normally + # need adjustment + #managesieve_max_line_length = 65536 + + # Maximum number of ManageSieve connections allowed for a user from each IP + # address. + # NOTE: The username is compared case-sensitively. + #mail_max_userip_connections = 10 + + # Space separated list of plugins to load (none known to be useful so far). + # Do NOT try to load IMAP plugins here. + #mail_plugins = + + # MANAGESIEVE logout format string: + # %i - total number of bytes read from client + # %o - total number of bytes sent to client + #managesieve_logout_format = bytes=%i/%o + + # To fool ManageSieve clients that are focused on CMU's timesieved you can + # specify the IMPLEMENTATION capability that Dovecot reports to clients. + # For example: 'Cyrus timsieved v2.2.13' + #managesieve_implementation_string = Dovecot Pigeonhole + + # Explicitly specify the SIEVE and NOTIFY capability reported by the server + # before login. If left unassigned these will be reported dynamically + # according to what the Sieve interpreter supports by default (after login + # this may differ depending on the user). + #managesieve_sieve_capability = + #managesieve_notify_capability = + + # The maximum number of compile errors that are returned to the client upon + # script upload or script verification. + #managesieve_max_compile_errors = 5 + + # Refer to 90-sieve.conf for script quota configuration and configuration of + # Sieve execution limits. +} +]]> + + + + = 2.1.4) : %v.%u +# Dovecot v0.99.x : %v.%u +# tpop3d : %Mf +# +# Note that Outlook 2003 seems to have problems with %v.%u format which was +# Dovecot's default, so if you're building a new server it would be a good +# idea to change this. %08Xu%08Xv should be pretty fail-safe. +# +#pop3_uidl_format = %08Xu%08Xv + +# Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes +# won't change those UIDLs. Currently this works only with Maildir. +#pop3_save_uidl = no + +# What to do about duplicate UIDLs if they exist? +# allow: Show duplicates to clients. +# rename: Append a temporary -2, -3, etc. counter after the UIDL. +#pop3_uidl_duplicates = allow + +# This option changes POP3 behavior so that it's not possible to actually +# delete mails via POP3, only hide them from future POP3 sessions. The mails +# will still be counted towards user's quota until actually deleted via IMAP. +# Use e.g. "$POP3Deleted" as the value (it will be visible as IMAP keyword). +# Make sure you can legally archive mails before enabling this setting. +#pop3_deleted_flag = + +# POP3 logout format string: +# %i - total number of bytes read from client +# %o - total number of bytes sent to client +# %t - number of TOP commands +# %p - number of bytes sent to client as a result of TOP command +# %r - number of RETR commands +# %b - number of bytes sent to client as a result of RETR command +# %d - number of deleted messages +# %m - number of messages (before deletion) +# %s - mailbox size in bytes (before deletion) +# %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly +#pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s + +# Workarounds for various client bugs: +# outlook-no-nuls: +# Outlook and Outlook Express hang if mails contain NUL characters. +# This setting replaces them with 0x80 character. +# oe-ns-eoh: +# Outlook Express and Netscape Mail breaks if end of headers-line is +# missing. This option simply sends it if it's missing. +# The list is space-separated. +#pop3_client_workarounds = + +protocol pop3 { + # Space separated list of plugins to load (default is global mail_plugins). + #mail_plugins = $mail_plugins + + # Maximum number of POP3 connections allowed for a user from each IP address. + # NOTE: The username is compared case-sensitively. + #mail_max_userip_connections = 10 +} +]]> + + + + See sieve_before fore executing scripts before the user's personal + # script. + #sieve_default = /var/lib/dovecot/sieve/default.sieve + + # Directory for :personal include scripts for the include extension. This + # is also where the ManageSieve service stores the user's scripts. + sieve_dir = ~/sieve + + # Directory for :global include scripts for the include extension. + #sieve_global_dir = + + # Path to a script file or a directory containing script files that need to be + # executed before the user's script. If the path points to a directory, all + # the Sieve scripts contained therein (with the proper .sieve extension) are + # executed. The order of execution within a directory is determined by the + # file names, using a normal 8bit per-character comparison. Multiple script + # file or directory paths can be specified by appending an increasing number. + #sieve_before = + #sieve_before2 = + #sieve_before3 = (etc...) + + # Identical to sieve_before, only the specified scripts are executed after the + # user's script (only when keep is still in effect!). Multiple script file or + # directory paths can be specified by appending an increasing number. + #sieve_after = + #sieve_after2 = + #sieve_after2 = (etc...) + + # Which Sieve language extensions are available to users. By default, all + # supported extensions are available, except for deprecated extensions or + # those that are still under development. Some system administrators may want + # to disable certain Sieve extensions or enable those that are not available + # by default. This setting can use '+' and '-' to specify differences relative + # to the default. For example `sieve_extensions = +imapflags' will enable the + # deprecated imapflags extension in addition to all extensions were already + # enabled by default. + #sieve_extensions = +notify +imapflags + + # Which Sieve language extensions are ONLY available in global scripts. This + # can be used to restrict the use of certain Sieve extensions to administrator + # control, for instance when these extensions can cause security concerns. + # This setting has higher precedence than the `sieve_extensions' setting + # (above), meaning that the extensions enabled with this setting are never + # available to the user's personal script no matter what is specified for the + # `sieve_extensions' setting. The syntax of this setting is similar to the + # `sieve_extensions' setting, with the difference that extensions are + # enabled or disabled for exclusive use in global scripts. Currently, no + # extensions are marked as such by default. + #sieve_global_extensions = + + # The Pigeonhole Sieve interpreter can have plugins of its own. Using this + # setting, the used plugins can be specified. Check the Dovecot wiki + # (wiki2.dovecot.org) or the pigeonhole website + # (http://pigeonhole.dovecot.org) for available plugins. + # The sieve_extprograms plugin is included in this release. + #sieve_plugins = + + # The separator that is expected between the :user and :detail + # address parts introduced by the subaddress extension. This may + # also be a sequence of characters (e.g. '--'). The current + # implementation looks for the separator from the left of the + # localpart and uses the first one encountered. The :user part is + # left of the separator and the :detail part is right. This setting + # is also used by Dovecot's LMTP service. + #recipient_delimiter = + + + # The maximum size of a Sieve script. The compiler will refuse to compile any + # script larger than this limit. If set to 0, no limit on the script size is + # enforced. + #sieve_max_script_size = 1M + + # The maximum number of actions that can be performed during a single script + # execution. If set to 0, no limit on the total number of actions is enforced. + #sieve_max_actions = 32 + + # The maximum number of redirect actions that can be performed during a single + # script execution. If set to 0, no redirect actions are allowed. + #sieve_max_redirects = 4 + + # The maximum number of personal Sieve scripts a single user can have. If set + # to 0, no limit on the number of scripts is enforced. + # (Currently only relevant for ManageSieve) + #sieve_quota_max_scripts = 0 + + # The maximum amount of disk storage a single user's scripts may occupy. If + # set to 0, no limit on the used amount of disk storage is enforced. + # (Currently only relevant for ManageSieve) + #sieve_quota_max_storage = 0 +} +]]> + + + + + + + + + + //service[@type='mail']/general/installs[@index=1] + + //service[@type='mail']/general/files[@index=1] + + //service[@type='mail']/general/commands[@index=1] + + + + + //service[@type='mail']/general/installs[@index=1] + + //service[@type='mail']/general/files[@index=1] + + //service[@type='mail']/general/commands[@index=1] + + + + + + + + + + FTP Server" +ServerType standalone +DeferWelcome off + +MultilineRFC2228 on +DefaultServer on +ShowSymlinks on + +TimeoutNoTransfer 600 +TimeoutStalled 600 +TimeoutIdle 1200 + +DisplayLogin welcome.msg +DisplayChdir .message true +ListOptions "-l" + +DenyFilter \*.*/ + +# Use this to jail all users in their homes +# DefaultRoot ~ + +# Users require a valid shell listed in /etc/shells to login. +# Use this directive to release that constrain. +# RequireValidShell off + +# Port 21 is the standard FTP port. +Port 21 + +# In some cases you have to specify passive ports range to by-pass +# firewall limitations. Ephemeral ports can be used for that, but +# feel free to use a more narrow range. +# PassivePorts 49152 65534 + +# If your host was NATted, this option is useful in order to +# allow passive tranfers to work. You have to use your public +# address and opening the passive ports used on your firewall as well. +# MasqueradeAddress 1.2.3.4 + +# This is useful for masquerading address with dynamic IPs: +# refresh any configured MasqueradeAddress directives every 8 hours + +# DynMasqRefresh 28800 + + +# To prevent DoS attacks, set the maximum number of child processes +# to 30. If you need to allow more than 30 concurrent connections +# at once, simply increase this value. Note that this ONLY works +# in standalone mode, in inetd mode you should use an inetd server +# that allows you to limit maximum number of processes per service +# (such as xinetd) +MaxInstances 30 + +# Set the user and group that the server normally runs at. +User proftpd +Group nogroup + +# Umask 022 is a good standard umask to prevent new files and dirs +# (second parm) from being group and world writable. +Umask 022 022 +# Normally, we want files to be overwriteable. +AllowOverwrite on + +# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: +# PersistentPasswd off + +# This is required to use both PAM-based authentication and local passwords +# AuthOrder mod_auth_pam.c* mod_auth_unix.c + +# Be warned: use of this directive impacts CPU average load! +# Uncomment this if you like to see progress and transfer rate with ftpwho +# in downloads. That is not needed for uploads rates. +# +# UseSendFile off + +TransferLog /var/log/proftpd/xferlog +SystemLog /var/log/proftpd/proftpd.log + +# Logging onto /var/log/lastlog is enabled but set to off by default +#UseLastlog on + +# In order to keep log file dates consistent after chroot, use timezone info +# from /etc/localtime. If this is not set, and proftpd is configured to +# chroot (e.g. DefaultRoot or ), it will use the non-daylight +# savings timezone regardless of whether DST is in effect. +#SetEnv TZ :/etc/localtime + + +QuotaEngine on + + + +Ratios off + + + +# Delay engine reduces impact of the so-called Timing Attack described in +# http://www.securityfocus.com/bid/11430/discuss +# It is on by default. + +DelayEngine on + + + +ControlsEngine off +ControlsMaxClients 2 +ControlsLog /var/log/proftpd/controls.log +ControlsInterval 5 +ControlsSocket /var/run/proftpd/proftpd.sock + + + +AdminControlsEngine off + + +# +# Alternative authentication frameworks +# +#Include /etc/proftpd/ldap.conf +Include /etc/proftpd/sql.conf + +# +# This is used for FTPS connections +# +#Include /etc/proftpd/tls.conf + +# +# Useful to keep VirtualHost/VirtualRoot directives separated +# +#Include /etc/proftpd/virtuals.conf + +# A basic anonymous configuration, no upload directories. + +# +# User ftp +# Group nogroup +# # We want clients to be able to login with "anonymous" as well as "ftp" +# UserAlias anonymous ftp +# # Cosmetic changes, all files belongs to ftp user +# DirFakeUser on ftp +# DirFakeGroup on ftp +# +# RequireValidShell off +# +# # Limit the maximum number of anonymous logins +# MaxClients 10 +# +# # We want 'welcome.msg' displayed at login, and '.message' displayed +# # in each newly chdired directory. +# DisplayLogin welcome.msg +# DisplayChdir .message +# +# # Limit WRITE everywhere in the anonymous chroot +# +# +# DenyAll +# +# +# +# # Uncomment this if you're brave. +# # +# # # Umask 022 is a good standard umask to prevent new files and dirs +# # # (second parm) from being group and world writable. +# # Umask 022 022 +# # +# # DenyAll +# # +# # +# # AllowAll +# # +# # +# +# + +# Include other custom configuration files +Include /etc/proftpd/conf.d/ +]]> + + + + + + + + +# +# Choose a SQL backend among MySQL or PostgreSQL. +# Both modules are loaded in default configuration, so you have to specify the backend +# or comment out the unused module in /etc/proftpd/modules.conf. +# Use 'mysql' or 'postgres' as possible values. +# +SQLBackend mysql +# +SQLEngine on +SQLAuthenticate on +# +# Use both a crypted or plaintext password +SQLAuthTypes Crypt +# +# Connection +SQLConnectInfo @ +# +# Describes both users/groups tables +# +SQLUserInfo ftp_users username password uid gid homedir shell +SQLGroupInfo ftp_groups groupname gid members +# +SQLUserWhereClause "login_enabled = 'y'" + +SQLLog PASS login +SQLNamedQuery login UPDATE "last_login=now(), login_count=login_count+1 WHERE username='%u'" ftp_users + +SQLLog RETR download +SQLNamedQuery download UPDATE "down_count=down_count+1, down_bytes=down_bytes+%b WHERE username='%u'" ftp_users + +SQLLog STOR upload +SQLNamedQuery upload UPDATE "up_count=up_count+1, up_bytes=up_bytes+%b WHERE username='%u'" ftp_users + +QuotaEngine on +QuotaShowQuotas on +QuotaDisplayUnits Mb +QuotaLock /var/lock/ftpd.quotatab.lock +QuotaLimitTable sql:/get-quota-limit +QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally +SQLNamedQuery get-quota-limit SELECT "ftp_users.username AS name, ftp_quotalimits.quota_type, ftp_quotalimits.per_session, ftp_quotalimits.limit_type, panel_customers.diskspace*1024 AS bytes_in_avail, ftp_quotalimits.bytes_out_avail, ftp_quotalimits.bytes_xfer_avail, ftp_quotalimits.files_in_avail, ftp_quotalimits.files_out_avail, ftp_quotalimits.files_xfer_avail FROM ftp_users, ftp_quotalimits, panel_customers WHERE ftp_users.username = '%{0}' AND panel_customers.loginname = SUBSTRING_INDEX('%{0}', 'ftp', 1) AND quota_type ='%{1}'" +SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used,bytes_out_used, bytes_xfer_used, files_in_used, files_out_used,files_xfer_used FROM ftp_quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'" +SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used= files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name= '%{6}' AND quota_type = '%{7}'" ftp_quotatallies +SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4},%{5}, %{6}, %{7}" ftp_quotatallies + + +]]> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# Mandatory : user password. You must have a password. + +MYSQLPassword + + +# Mandatory : database to open. + +MYSQLDatabase + + +# Mandatory : how passwords are stored +# Valid values are : "cleartext", "crypt", "sha1", "md5" and "password" +# ("password" = MySQL password() function) +# You can also use "any" to try "crypt", "sha1", "md5" *and* "password" + +MYSQLCrypt any + + +# In the following directives, parts of the strings are replaced at +# run-time before performing queries : +# +# \L is replaced by the login of the user trying to authenticate. +# \I is replaced by the IP address the user connected to. +# \P is replaced by the port number the user connected to. +# \R is replaced by the IP address the user connected from. +# \D is replaced by the remote IP address, as a long decimal number. +# +# Very complex queries can be performed using these substitution strings, +# especially for virtual hosting. + + +# Query to execute in order to fetch the password + +MYSQLGetPW SELECT password FROM ftp_users WHERE username="\L" AND login_enabled="y" + + +# Query to execute in order to fetch the system user name or uid + +MYSQLGetUID SELECT uid FROM ftp_users WHERE username="\L" AND login_enabled="y" + + +# Optional : default UID - if set this overrides MYSQLGetUID + +#MYSQLDefaultUID 1000 + + +# Query to execute in order to fetch the system user group or gid + +MYSQLGetGID SELECT gid FROM ftp_users WHERE username="\L" AND login_enabled="y" + + +# Optional : default GID - if set this overrides MYSQLGetGID + +#MYSQLDefaultGID 1000 + + +# Query to execute in order to fetch the home directory + +MYSQLGetDir SELECT homedir FROM ftp_users WHERE username="\L" AND login_enabled="y" + + +# Optional : query to get the maximal number of files +# Pure-FTPd must have been compiled with virtual quotas support. + +# MySQLGetQTAFS SELECT QuotaFiles FROM users WHERE User='\L' + + +# Optional : query to get the maximal disk usage (virtual quotas) +# The number should be in Megabytes. +# Pure-FTPd must have been compiled with virtual quotas support. + +MySQLGetQTASZ SELECT panel_customers.diskspace/1024 AS QuotaSize FROM panel_customers, ftp_users WHERE username = "\L" AND panel_customers.loginname = SUBSTRING_INDEX('\L', 'ftp', 1) + + +# Optional : ratios. The server has to be compiled with ratio support. + +# MySQLGetRatioUL SELECT ULRatio FROM users WHERE User='\L' +# MySQLGetRatioDL SELECT DLRatio FROM users WHERE User='\L' + + +# Optional : bandwidth throttling. +# The server has to be compiled with throttling support. +# Values are in KB/s . + +# MySQLGetBandwidthUL SELECT ULBandwidth FROM users WHERE User='\L' +# MySQLGetBandwidthDL SELECT DLBandwidth FROM users WHERE User='\L' + +# Enable ~ expansion. NEVER ENABLE THIS BLINDLY UNLESS : +# 1) You know what you are doing. +# 2) Real and virtual users match. + +# MySQLForceTildeExpansion 1 + + +# If you're using a transactionnal storage engine, you can enable SQL +# transactions to avoid races. Leave this commented if you are using the +# traditionnal MyIsam engine. + +# MySQLTransactions On +]]> + + + + + + + + + + + + + + + + + + + + + + + scripts/froxlor_master_cronjob.php +]]> + + + + + + + + + + + + + + + + + + +database +username +password +port 3306 +#socket /var/run/mysqld/mysqld.sock +]]> + + + + + {{sql.socket}} + + + + + + +password +]]> + + + + + + + + + + + + + + + *.log { + missingok + weekly + rotate 4 + compress + delaycompress + notifempty + create + sharedscripts + postrotate + > /dev/null 2>&1 || true + endscript +} +]]> + + + + + + + + + {{settings.system.mod_fcgid_ownvhost}} + + + + + + + + + + + + + + {{settings.system.webserver}} + + + + + + {{settings.system.webserver}} + + + + + + {{settings.system.webserver}} + + + + + {{settings.phpfpm.enabled_ownvhost}} + + {{settings.phpfpm.vhost_httpuser}} + + + + + + {{settings.system.webserver}} + + {{settings.phpfpm.enabled_ownvhost}} + + + + + + + + + +