massive update of the wheezy templates, but take them with a grain of salt for now, in particular:

- dkim is broken (pending code changes, this affects *everyone* with opendkim i suppose)
- it has received *no* testing (yet)

other noteworthy stuff:
- nginx should be switched to upstream provided fcgi params file, as its essentially the same.
- dovecot should now work with exim4
- for the most part, configs were switched to the commented version if available, that requires some more reading for the admins, but this isn't a problem for you... right? :)

while i don't think any of this will break horribly, like drinking the beer in your fridge or some other nasty stuff, it will still require testing

Signed-off-by: Robert Förster (Dessa) <Dessa@froxlor.org>

templates/misc/configfiles/debian_wheezy/powerdns/etc_powerdns_bindbackend.conf

@@ -0,0 +1,12 @@
+# Bind backend configuration
+
+# Location of the Bind configuration file to parse. 
+bind-config=<BIND_CONFIG_PATH>named.conf
+
+# How often to check for zone changes. See 'Operation' section. 
+bind-check-interval=180
+
+# Uncomment to enable Huffman compression on zone data.
+# Currently saves around 20% of memory actually used, but slows down operation.
+# bind-enable-huffman
+

templates/misc/configfiles/debian_wheezy/powerdns/etc_powerdns_pdns-froxlor.conf

@@ -1,7 +0,0 @@
-allow-axfr-ips=<NAMESERVERS>
-#local-ipv6=YOUR_IPv6_(if_any)
-bind-config=<BIND_CONFIG_PATH>named.conf
-bind-check-interval=180
-log-dns-details=yes
-local-address=<SERVERIP>,127.0.0.1
-

templates/misc/configfiles/debian_wheezy/powerdns/etc_powerdns_pdns.conf

@@ -1,17 +1,314 @@
-allow-recursion=127.0.0.1
-config-dir=/etc/powerdns
-daemon=yes
-guardian=yes
-launch=bind
-lazy-recursion=yes
-local-port=53
-master=yes
-module-dir=/usr/lib/powerdns
-setgid=pdns
-setuid=pdns
-socket-dir=/var/run
-version-string=powerdns
-bind-config=<BIND_CONFIG_PATH>named.conf
-bind-check-interval=300
-include=/etc/powerdns/pdns_froxlor.conf
+# Autogenerated configuration file template
+#################################
+# allow-axfr-ips    If enabled, restrict zonetransfers to originate from these
+#                   IP addresses
+#
+allow-axfr-ips=<NAMESERVERS>
 
+#################################
+# allow-recursion	List of netmasks that are allowed to recurse
+#
+allow-recursion=127.0.0.1
+
+#################################
+# allow-recursion-override   Local data even about hosts that don't exist will
+#                            override the internet. (on/off)
+#
+# allow-recursion-override=
+
+#################################
+# cache-ttl	Seconds to store packets in the PacketCache
+#
+# cache-ttl=20
+
+#################################
+# chroot	If set, chroot to this directory for more security
+#
+# chroot=/var/spool/powerdns
+
+#################################
+# config-dir	Location of configuration directory (pdns.conf)
+#
+config-dir=/etc/powerdns
+
+#################################
+# config-name	Name of this virtual configuration - will rename the binary image
+#
+# config-name=
+
+#################################
+# control-console	Debugging switch - don't use
+#
+# control-console=no
+
+#################################
+# daemon	Operate as a daemon
+#
+daemon=yes
+
+#################################
+# default-soa-name	name to insert in the SOA record if none set in the backend
+#
+# default-soa-name=a.misconfigured.powerdns.server
+
+#################################
+# disable-axfr	Disable zonetransfers but do allow TCP queries
+#
+disable-axfr=yes
+
+#################################
+# disable-tcp	Do not listen to TCP queries
+#
+# disable-tcp=no
+
+#################################
+# distributor-threads	Default number of Distributor (backend) threads to start
+#
+# distributor-threads=3
+
+#################################
+# fancy-records	Process URL and MBOXFW records
+#
+# fancy-records=no
+
+#################################
+# guardian	Run within a guardian process
+#
+guardian=yes
+
+#################################
+# launch	Which backends to launch and order to query them in
+#
+launch=bind
+
+#################################
+# lazy-recursion	Only recurse if question cannot be answered locally
+#
+lazy-recursion=yes
+
+#################################
+# load-modules	Load this module - supply absolute or relative path
+#
+# load-modules=
+
+#################################
+# local-address	Local IP address to which we bind
+#
+local-address=<SERVERIP>,127.0.0.1
+
+#################################
+# local-ipv6	Local IP address to which we bind
+#
+# local-ipv6=
+
+#################################
+# local-port	The port on which we listen
+#
+local-port=53
+
+#################################
+# log-dns-details	If PDNS should log failed update requests
+#
+log-dns-details=yes
+
+#################################
+# log-failed-updates	If PDNS should log failed update requests
+#
+# log-failed-updates=
+
+#################################
+# logfile	Logfile to use
+#
+# logfile=/var/log/pdns.log
+
+#################################
+# logging-facility	Log under a specific facility
+#
+# logging-facility=
+
+#################################
+# loglevel	Amount of logging. Higher is more. Do not set below 3
+#
+# loglevel=4
+
+#################################
+# master	Act as a master
+#
+master=yes
+
+#################################
+# max-queue-length	Maximum queuelength before considering situation lost
+#
+# max-queue-length=5000
+
+#################################
+# max-tcp-connections	Maximum number of TCP connections
+#
+# max-tcp-connections=10
+
+#################################
+# module-dir	Default directory for modules
+#
+module-dir=/usr/lib/powerdns
+
+#################################
+# negquery-cache-ttl	Seconds to store packets in the PacketCache
+#
+# negquery-cache-ttl=60
+
+#################################
+# out-of-zone-additional-processing	Do out of zone additional processing
+#
+# out-of-zone-additional-processing=no
+
+#################################
+# query-cache-ttl	Seconds to store packets in the PacketCache
+#
+# query-cache-ttl=20
+
+#################################
+# query-logging	Hint backends that queries should be logged
+#
+# query-logging=no
+
+#################################
+# queue-limit	Maximum number of milliseconds to queue a query
+#
+# queue-limit=1500
+
+#################################
+# query-local-address   The IP address to use as a source address for sending
+#                       queries.
+# query-local-address=
+
+#################################
+# receiver-threads	Number of receiver threads to launch
+#
+# receiver-threads=1
+
+#################################
+# recursive-cache-ttl	Seconds to store packets in the PacketCache
+#
+# recursive-cache-ttl=10
+
+#################################
+# recursor	If recursion is desired, IP address of a recursing nameserver
+#
+# recursor=
+
+#################################
+# setgid	If set, change group id to this gid for more security
+#
+setgid=pdns
+
+#################################
+# setuid	If set, change user id to this uid for more security
+#
+setuid=pdns
+
+#################################
+# skip-cname	Do not perform CNAME indirection for each query
+#
+# skip-cname=no
+
+#################################
+# slave	Act as a slave
+#
+# slave=no
+
+#################################
+# slave-cycle-interval	Reschedule failed SOA serial checks once every .. seconds
+#
+# slave-cycle-interval=60
+
+#################################
+# smtpredirector	Our smtpredir MX host
+#
+# smtpredirector=a.misconfigured.powerdns.smtp.server
+
+#################################
+# soa-minimum-ttl	Default SOA mininum ttl
+#
+# soa-minimum-ttl=3600
+
+#################################
+# soa-refresh-default  Default SOA refresh
+#
+# soa-refresh-default=10800
+
+#################################
+# soa-retry-default    Default SOA retry
+#
+# soa-retry-default=3600
+
+#################################
+# soa-expire-default   Default SOA expire
+#
+# soa-expire-default=604800
+
+#################################
+# soa-serial-offset	Make sure that no SOA serial is less than this number
+#
+# soa-serial-offset=0
+
+#################################
+# socket-dir	Where the controlsocket will live
+#
+socket-dir=/var/run
+
+#################################
+# strict-rfc-axfrs	Perform strictly rfc compliant axfrs (very slow)
+#
+# strict-rfc-axfrs=no
+
+#################################
+# urlredirector	Where we send hosts to that need to be url redirected
+#
+# urlredirector=127.0.0.1
+
+#################################
+# use-logfile	Use a log file
+#
+# use-logfile=yes
+
+#################################
+# webserver	Start a webserver for monitoring
+#
+# webserver=no
+
+#################################
+# webserver-address	IP Address of webserver to listen on
+#
+# webserver-address=127.0.0.1
+
+#################################
+# webserver-password	Password required for accessing the webserver
+#
+# webserver-password=
+
+#################################
+# webserver-port	Port of webserver to listen on
+#
+# webserver-port=8081
+
+#################################
+# webserver-print-arguments	If the webserver should print arguments
+#
+# webserver-print-arguments=no
+
+#################################
+# wildcard-url	Process URL and MBOXFW records
+#
+# wildcard-url=no
+
+#################################
+# wildcards	Honor wildcards in the database
+#
+# wildcards=
+
+#################################
+# version-string   What should PowerDNS return for version
+#                  allowed methods are anonymous / powerdns / full / custom
+version-string=powerdns
+
+include=/etc/powerdns/pdns.d