{{settings.system.apacheconf_vhost}} {{settings.system.apacheconf_vhost}} {{settings.system.apacheconf_diroptions}} {{settings.system.apacheconf_diroptions}} {{settings.system.deactivateddocroot}} //service[@type='http']/general/commands Require all granted ]]> {{settings.system.vmail_gid}} {{settings.system.vmail_uid}} password = dbname = hosts = query = SELECT destination FROM mail_virtual WHERE email = '%s' AND trim(destination) <> '' ]]> password = dbname = hosts = query = SELECT domain FROM panel_domains WHERE domain = '%s' AND isemaildomain = '1' ]]> password = dbname = expansion_limit = 1 hosts = query = SELECT CONCAT(homedir,maildir) FROM mail_users WHERE email = '%s' ]]> password = dbname = hosts = query = SELECT DISTINCT username FROM mail_users WHERE email in ((SELECT mail_virtual.email_full FROM mail_virtual WHERE mail_virtual.email = '%s' UNION SELECT mail_virtual.destination FROM mail_virtual WHERE mail_virtual.email = '%s')); ]]> password = dbname = expansion_limit = 1 hosts = query = SELECT uid FROM mail_users WHERE email = '%s' ]]> password = dbname = expansion_limit = 1 hosts = query = SELECT gid FROM mail_users WHERE email = '%s' ]]> //service[@type='smtp']/general/commands[@index=1] //service[@type='smtp']/general/installs[@index=1] //service[@type='smtp']/general/commands[@index=2] # should be different from $mydomain eg. "mail.$mydomain" myhostname = mail.$mydomain mydestination = $myhostname, $mydomain, localhost.$myhostname, localhost.$mydomain, localhost mynetworks = 127.0.0.0/8 inet_interfaces = all append_dot_mydomain = no biff = no # Postfix performance settings default_destination_concurrency_limit = 20 local_destination_concurrency_limit = 2 # SMTPD Settings smtpd_banner = $myhostname ESMTP $mail_name smtpd_helo_required = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_unauth_pipelining, reject_non_fqdn_recipient smtpd_sender_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated, reject_unknown_helo_hostname, reject_unknown_recipient_domain, reject_unknown_sender_domain smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unknown_client_hostname # Postfix 2.10 requires this option. Postfix < 2.10 ignores this. # The option is intentionally left empty. smtpd_relay_restrictions = # Maximum size of Message in bytes (50MB) message_size_limit = 52428800 mailbox_size_limit = 0 ## SASL Auth Settings smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname broken_sasl_auth_clients = yes ## Dovecot Settings for deliver, SASL Auth and virtual transport smtpd_sasl_type = dovecot mailbox_command = /usr/lib/dovecot/deliver virtual_transport = dovecot dovecot_destination_recipient_limit = 1 smtpd_sasl_path = private/auth # Virtual delivery settings virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual_mailbox_maps.cf virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual_mailbox_domains.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual_alias_maps.cf smtpd_sender_login_maps = mysql:/etc/postfix/mysql-virtual_sender_permissions.cf # Local delivery settings local_transport = local alias_maps = $alias_database ### TLS settings ### ## TLS for outgoing mails from the server to another server #smtp_tls_security_level = may #smtp_tls_note_starttls_offer = yes ## TLS for incoming connections (clients or other mail servers) #smtpd_tls_security_level = may #smtpd_tls_cert_file = /etc/ssl/server/.pem #smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt #smtpd_tls_loglevel = 1 #smtpd_tls_received_header = yes debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 ]]> //service[@type='smtp']/general/files[@index=0] //service[@type='smtp']/general/commands[@index=3] #protocols = imap pop3 lmtp #protocols = imap pop3 lmtp sieve # A comma separated list of IPs or hosts where to listen in for connections. # "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces. # If you want to specify non-default ports or anything more complex, # edit conf.d/master.conf. listen = *, :: # Base directory where to store runtime data. base_dir = /var/run/dovecot/ # Greeting message for clients. login_greeting = Dovecot ready. # Space separated list of trusted network ranges. Connections from these # IPs are allowed to override their IP addresses and ports (for logging and # for authentication checks). disable_plaintext_auth is also ignored for # these networks. Typically you'd specify your IMAP proxy servers here. #login_trusted_networks = # Sepace separated list of login access check sockets (e.g. tcpwrap) #login_access_sockets = # Show more verbose process titles (in ps). Currently shows user name and # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no # Should all processes be killed when Dovecot master process shuts down. # Setting this to "no" means that Dovecot can be upgraded without # forcing existing client connections to close (although that could also be # a problem if the upgrade is e.g. because of a security fix). shutdown_clients = yes # If non-zero, run mail commands via this many connections to doveadm server, # instead of running them directly in the same process. #doveadm_worker_count = 0 # UNIX socket or host:port used for connecting to doveadm server #doveadm_socket_path = doveadm-server ## ## Dictionary server settings ## # Dictionary can be used to store key=value lists. This is used by several # plugins. The dictionary can be accessed either directly or though a # dictionary server. The following dict block maps dictionary names to URIs # when the server is used. These can then be referenced using URIs in format # "proxy::". dict { #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext } # Most of the actual configuration gets included below. The filenames are # first sorted by their ASCII value and parsed in that order. The 00-prefixes # in filenames are intended to make it easier to understand the ordering. !include conf.d/*.conf # A config file can also tried to be included without giving an error if # it's not found: #!include_try /etc/dovecot/local.conf ]]> to characters. For example "#@/@" means # that '#' and '/' characters are translated to '@'. #auth_username_translation = # Username formatting before it's looked up from databases. You can use # the standard variables here, eg. %Lu would lowercase the username, %n would # drop away the domain if it was given, or "%n-AT-%d" would change the '@' into # "-AT-". This translation is done after auth_username_translation changes. #auth_username_format = %Lu # If you want to allow master users to log in by specifying the master # username within the normal username string (ie. not using SASL mechanism's # support for it), you can specify the separator character here. The format # is then . UW-IMAP uses "*" as the # separator, so that could be a good choice. #auth_master_user_separator = # Username to use for users logging in with ANONYMOUS SASL mechanism #auth_anonymous_username = anonymous # Maximum number of dovecot-auth worker processes. They're used to execute # blocking passdb and userdb queries (eg. MySQL and PAM). They're # automatically created and destroyed as needed. #auth_worker_max_count = 30 # Host name to use in GSSAPI principal names. The default is to use the # name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab # entries. #auth_gssapi_hostname = # Kerberos keytab to use for the GSSAPI mechanism. Will use the system # default (usually /etc/krb5.keytab) if not specified. You may need to change # the auth service to run as root to be able to read this file. #auth_krb5_keytab = # Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and # ntlm_auth helper. #auth_use_winbind = no # Path for Samba's ntlm_auth helper binary. #auth_winbind_helper_path = /usr/bin/ntlm_auth # Time to delay before replying to failed authentications. #auth_failure_delay = 2 secs # Require a valid SSL client certificate or the authentication fails. #auth_ssl_require_client_cert = no # Take the username from client's SSL certificate, using # X509_NAME_get_text_by_NID() which returns the subject's DN's # CommonName. #auth_ssl_username_from_cert = no # Space separated list of wanted authentication mechanisms: # plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey # gss-spnego # NOTE: See also disable_plaintext_auth setting. auth_mechanisms = plain ## ## Password and user databases ## # # Password database is used to verify user's password (and nothing more). # You can have multiple passdbs and userdbs. This is useful if you want to # allow both system users (/etc/passwd) and virtual users to login without # duplicating the system users into virtual database. # # # # User database specifies where mails are located and what user/group IDs # own them. For single-UID configuration use "static" userdb. # # #!include auth-deny.conf.ext #!include auth-master.conf.ext #!include auth-system.conf.ext !include auth-sql.conf.ext #!include auth-ldap.conf.ext #!include auth-passwdfile.conf.ext #!include auth-checkpassword.conf.ext #!include auth-vpopmail.conf.ext #!include auth-static.conf.ext ]]> method=%m rip=%r lip=%l mpid=%e %c # Login log format. %s contains login_log_format_elements string, %$ contains # the data we want to log. #login_log_format = %$: %s # Log prefix for mail processes. See doc/wiki/Variables.txt for list of # possible variables you can use. #mail_log_prefix = "%s(%u): " # Format to use for logging mail deliveries. You can use variables: # %$ - Delivery status message (e.g. "saved to INBOX") # %m - Message-ID # %s - Subject # %f - From address # %p - Physical size # %w - Virtual size #deliver_log_format = msgid=%m: %$ ]]> # mail_location = maildir:/var/vmail/%d/%u # ########################## TODO # If you need to set multiple mailbox locations or want to change default # namespace settings, you can do it by defining namespace sections. # # You can have private, shared and public namespaces. Private namespaces # are for user's personal mails. Shared namespaces are for accessing other # users' mailboxes that have been shared. Public namespaces are for shared # mailboxes that are managed by sysadmin. If you create any shared or public # namespaces you'll typically want to enable ACL plugin also, otherwise all # users can access all the shared mailboxes, assuming they have permissions # on filesystem level to do so. namespace inbox { # Namespace type: private, shared or public #type = private # Hierarchy separator to use. You should use the same separator for all # namespaces or some clients get confused. '/' is usually a good one. # The default however depends on the underlying mail storage format. #separator = # Prefix required to access this namespace. This needs to be different for # all namespaces. For example "Public/". #prefix = # Physical location of the mailbox. This is in same format as # mail_location, which is also the default for it. #location = # There can be only one INBOX, and this setting defines which namespace # has it. inbox = yes # If namespace is hidden, it's not advertised to clients via NAMESPACE # extension. You'll most likely also want to set list=no. This is mostly # useful when converting from another server with different namespaces which # you want to deprecate but still keep working. For example you can create # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/". #hidden = no # Show the mailboxes under this namespace with LIST command. This makes the # namespace visible for clients that don't support NAMESPACE extension. # "children" value lists child mailboxes, but hides the namespace prefix. #list = yes # Namespace handles its own subscriptions. If set to "no", the parent # namespace handles them (empty prefix should always have this as "yes") #subscriptions = yes } # Example shared namespace configuration #namespace { #type = shared #separator = / # Mailboxes are visible under "shared/user@domain/" # %%n, %%d and %%u are expanded to the destination user. #prefix = shared/%%u/ # Mail location for other users' mailboxes. Note that %variables and ~/ # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the # destination user's data. #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u # Use the default namespace for saving subscriptions. #subscriptions = no # List the shared/ namespace only if there are visible shared mailboxes. #list = children #} # Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"? #mail_shared_explicit_inbox = no # System user and group used to access mails. If you use multiple, userdb # can override these by returning uid or gid fields. You can use either numbers # or names. #mail_uid = #mail_gid = # Group to enable temporarily for privileged operations. Currently this is # used only with INBOX when either its initial creation or dotlocking fails. # Typically this is set to "mail" to give access to /var/mail. #mail_privileged_group = # Grant access to these supplementary groups for mail processes. Typically # these are used to set up access to shared mailboxes. Note that it may be # dangerous to set these if users can create symlinks (e.g. if "mail" group is # set here, ln -s /var/mail ~/mail/var could allow a user to delete others' # mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it). #mail_access_groups = vmail # Allow full filesystem access to clients. There's no access checks other than # what the operating system does for the active UID/GID. It works with both # maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ # or ~user/. #mail_full_filesystem_access = no # Dictionary for key=value mailbox attributes. Currently used by URLAUTH, but # soon intended to be used by METADATA as well. #mail_attribute_dict = ## ## Mail processes ## # Don't use mmap() at all. This is required if you store indexes to shared # filesystems (NFS or clustered filesystem). #mmap_disable = no # Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL # since version 3, so this should be safe to use nowadays by default. #dotlock_use_excl = yes # When to use fsync() or fdatasync() calls: # optimized (default): Whenever necessary to avoid losing important data # always: Useful with e.g. NFS when write()s are delayed # never: Never use it (best performance, but crashes can lose data) #mail_fsync = optimized # Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches # whenever needed. If you're using only a single mail server this isn't needed. #mail_nfs_storage = no # Mail index files also exist in NFS. Setting this to yes requires # mmap_disable=yes and fsync_disable=no. #mail_nfs_index = no # Locking method for index files. Alternatives are fcntl, flock and dotlock. # Dotlocking uses some tricks which may create more disk I/O than other locking # methods. NFS users: flock doesn't work, remember to change mmap_disable. #lock_method = fcntl # Directory in which LDA/LMTP temporarily stores incoming mails >128 kB. #mail_temp_dir = /tmp # Valid UID range for users, defaults to 500 and above. This is mostly # to make sure that users can't log in as daemons or other system users. # Note that denying root logins is hardcoded to dovecot binary and can't # be done even if first_valid_uid is set to 0. first_valid_uid = 150 last_valid_uid = 150 # Valid GID range for users, defaults to non-root/wheel. Users having # non-valid GID as primary group ID aren't allowed to log in. If user # belongs to supplementary groups with non-valid GIDs, those groups are # not set. first_valid_gid = 12 last_valid_gid = 12 # Maximum allowed length for mail keyword name. It's only forced when trying # to create new keywords. #mail_max_keyword_length = 50 # ':' separated list of directories under which chrooting is allowed for mail # processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). # This setting doesn't affect login_chroot, mail_chroot or auth chroot # settings. If this setting is empty, "/./" in home dirs are ignored. # WARNING: Never add directories here which local users can modify, that # may lead to root exploit. Usually this should be done only if you don't # allow shell access for users. #valid_chroot_dirs = # Default chroot directory for mail processes. This can be overridden for # specific users in user database by giving /./ in user's home directory # (eg. /home/./user chroots into /home). Note that usually there is no real # need to do chrooting, Dovecot doesn't allow users to access files outside # their mail directory anyway. If your home directories are prefixed with # the chroot directory, append "/." to mail_chroot. #mail_chroot = # UNIX socket path to master authentication server to find users. # This is used by imap (for shared users) and lda. #auth_socket_path = /var/run/dovecot/auth-userdb # Directory where to look up mail plugins. #mail_plugin_dir = /usr/lib/dovecot # Space separated list of plugins to load for all services. Plugins specific to # IMAP, LDA, etc. are added to this list in their own .conf files. #mail_plugins = ## ## Mailbox handling optimizations ## # Mailbox list indexes can be used to optimize IMAP STATUS commands. They are # also required for IMAP NOTIFY extension to be enabled. #mailbox_list_index = no # The minimum number of mails in a mailbox before updates are done to cache # file. This allows optimizing Dovecot's behavior to do less disk writes at # the cost of more disk reads. #mail_cache_min_mail_count = 0 # When IDLE command is running, mailbox is checked once in a while to see if # there are any new mails or other changes. This setting defines the minimum # time to wait between those checks. Dovecot can also use dnotify, inotify and # kqueue to find out immediately when changes occur. #mailbox_idle_check_interval = 30 secs # Save mails with CR+LF instead of plain LF. This makes sending those mails # take less CPU, especially with sendfile() syscall with Linux and FreeBSD. # But it also creates a bit more disk I/O which may just make it slower. # Also note that if other software reads the mboxes/maildirs, they may handle # the extra CRs wrong and cause problems. #mail_save_crlf = no # Max number of mails to keep open and prefetch to memory. This only works with # some mailbox formats and/or operating systems. #mail_prefetch_count = 0 # How often to scan for stale temporary files and delete them (0 = never). # These should exist only after Dovecot dies in the middle of saving mails. #mail_temp_scan_interval = 1w ## ## Maildir-specific settings ## # By default LIST command returns all entries in maildir beginning with a dot. # Enabling this option makes Dovecot return only entries which are directories. # This is done by stat()ing each entry, so it causes more disk I/O. # (For systems setting struct dirent->d_type, this check is free and it's # done always regardless of this setting) #maildir_stat_dirs = no # When copying a message, do it with hard links whenever possible. This makes # the performance much better, and it's unlikely to have any side effects. #maildir_copy_with_hardlinks = yes # Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only # when its mtime changes unexpectedly or when we can't find the mail otherwise. #maildir_very_dirty_syncs = no # If enabled, Dovecot doesn't use the S= in the Maildir filenames for # getting the mail's physical size, except when recalculating Maildir++ quota. # This can be useful in systems where a lot of the Maildir filenames have a # broken size. The performance hit for enabling this is very small. #maildir_broken_filename_sizes = no ## ## mbox-specific settings ## # Which locking methods to use for locking mbox. There are four available: # dotlock: Create .lock file. This is the oldest and most NFS-safe # solution. If you want to use /var/mail/ like directory, the users # will need write access to that directory. # dotlock_try: Same as dotlock, but if it fails because of permissions or # because there isn't enough disk space, just skip it. # fcntl : Use this if possible. Works with NFS too if lockd is used. # flock : May not exist in all systems. Doesn't work with NFS. # lockf : May not exist in all systems. Doesn't work with NFS. # # You can use multiple locking methods; if you do the order they're declared # in is important to avoid deadlocks if other MTAs/MUAs are using multiple # locking methods as well. Some operating systems don't allow using some of # them simultaneously. #mbox_read_locks = fcntl #mbox_write_locks = dotlock fcntl mbox_write_locks = fcntl # Maximum time to wait for lock (all of them) before aborting. #mbox_lock_timeout = 5 mins # If dotlock exists but the mailbox isn't modified in any way, override the # lock file after this much time. #mbox_dotlock_change_timeout = 2 mins # When mbox changes unexpectedly we have to fully read it to find out what # changed. If the mbox is large this can take a long time. Since the change # is usually just a newly appended mail, it'd be faster to simply read the # new mails. If this setting is enabled, Dovecot does this but still safely # fallbacks to re-reading the whole mbox file whenever something in mbox isn't # how it's expected to be. The only real downside to this setting is that if # some other MUA changes message flags, Dovecot doesn't notice it immediately. # Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK # commands. #mbox_dirty_syncs = yes # Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, # EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. #mbox_very_dirty_syncs = no # Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK # commands and when closing the mailbox). This is especially useful for POP3 # where clients often delete all mails. The downside is that our changes # aren't immediately visible to other MUAs. #mbox_lazy_writes = yes # If mbox size is smaller than this (e.g. 100k), don't write index files. # If an index file already exists it's still read, just not updated. #mbox_min_index_size = 0 # Mail header selection algorithm to use for MD5 POP3 UIDLs when # pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired # algorithm, but it fails if the first Received: header isn't unique in all # mails. An alternative algorithm is "all" that selects all headers. #mbox_md5 = apop3d ## ## mdbox-specific settings ## # Maximum dbox file size until it's rotated. #mdbox_rotate_size = 2M # Maximum dbox file age until it's rotated. Typically in days. Day begins # from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled. #mdbox_rotate_interval = 0 # When creating new mdbox files, immediately preallocate their size to # mdbox_rotate_size. This setting currently works only in Linux with some # filesystems (ext4, xfs). #mdbox_preallocate_space = no ## ## Mail attachments ## # sdbox and mdbox support saving mail attachments to external files, which # also allows single instance storage for them. Other backends don't support # this for now. # Directory root where to store mail attachments. Disabled, if empty. #mail_attachment_dir = # Attachments smaller than this aren't saved externally. It's also possible to # write a plugin to disable saving specific attachments externally. #mail_attachment_min_size = 128k # Filesystem backend to use for saving attachments: # posix : No SiS done by Dovecot (but this might help FS's own deduplication) # sis posix : SiS with immediate byte-by-byte comparison during saving # sis-queue posix : SiS with delayed comparison and deduplication #mail_attachment_fs = sis posix # Hash format to use in attachment filenames. You can add any text and # variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}. # Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits #mail_attachment_hash = %{sha1} ]]> #service_count = 1 # Number of processes to always keep waiting for more connections. #process_min_avail = 0 # If you set service_count=0, you probably need to grow this. #vsz_limit = $default_vsz_limit } service pop3-login { inet_listener pop3 { #port = 110 } inet_listener pop3s { #port = 995 #ssl = yes } } service lmtp { unix_listener lmtp { #mode = 0666 } # Create inet listener only if you can't use the above UNIX socket #inet_listener lmtp { # Avoid making LMTP visible for the entire internet #address = #port = #} } service imap { # Most of the memory goes to mmap()ing files. You may need to increase this # limit if you have huge mailboxes. #vsz_limit = $default_vsz_limit # Max. number of IMAP processes (connections) #process_limit = 1024 } service pop3 { # Max. number of POP3 processes (connections) #process_limit = 1024 } service auth { # auth_socket_path points to this userdb socket by default. It's typically # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have # full permissions to this socket are able to get a list of all usernames and # get the results of everyone's userdb lookups. # # The default 0666 mode allows anyone to connect to the socket, but the # userdb lookups will succeed only if the userdb returns an "uid" field that # matches the caller process's UID. Also if caller's uid or gid matches the # socket's uid or gid the lookup succeeds. Anything else causes a failure. # # To give the caller full permissions to lookup all users, set the mode to # something else than 0666 and Dovecot lets the kernel enforce the # permissions (e.g. 0777 allows everyone full permissions). unix_listener auth-userdb { #mode = 0666 #user = #group = } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 } # Auth process is run as this user. #user = $default_internal_user } service auth-worker { # Auth worker process is run as root by default, so that it can access # /etc/shadow. If this isn't necessary, the user should be changed to # $default_internal_user. #user = root } service dict { # If dict proxy is used, mail processes should have access to its socket. # For example: mode=0660, group=vmail and global mail_access_groups=vmail unix_listener dict { #mode = 0600 #user = #group = } } ]]> # disable plain pop3 and imap, allowed are only pop3+TLS, pop3s, imap+TLS and imaps # plain imap and pop3 are still allowed for local connections ssl = no # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before # dropping root privileges, so keep the key file unreadable by anyone but # root. Included doc/mkcert.sh can be used to easily generate self-signed # certificate, just make sure to update the domains in dovecot-openssl.cnf #ssl_cert = . %d expands to recipient domain. postmaster_address = postmaster@ # Hostname to use in various parts of sent mails (e.g. in Message-Id) and # in LMTP replies. Default is the system's real hostname@domain. #hostname = # If user is over quota, return with temporary failure instead of # bouncing the mail. #quota_full_tempfail = no # Binary to use for sending mails. #sendmail_path = /usr/sbin/sendmail # If non-empty, send mails via this SMTP host[:port] instead of sendmail. #submission_host = # Subject: header to use for rejection mails. You can use the same variables # as for rejection_reason below. #rejection_subject = Rejected: %s # Human readable error message for rejection mails. You can use variables: # %n = CRLF, %r = reason, %s = original subject, %t = recipient #rejection_reason = Your message to <%t> was automatically rejected:%n%r # Delimiter character between local-part and detail in email address. #recipient_delimiter = + # Header where the original recipient address (SMTP's RCPT TO: address) is taken # from if not available elsewhere. With dovecot-lda -a parameter overrides this. # A commonly used header for this is X-Original-To. #lda_original_recipient_header = # Should saving a mail to a nonexistent mailbox automatically create it? #lda_mailbox_autocreate = no # Should automatically created mailboxes be also automatically subscribed? #lda_mailbox_autosubscribe = no protocol lda { # Space separated list of plugins to load (default is global mail_plugins). mail_plugins = $mail_plugins quota sieve } ]]> #service_count = 1 # Number of processes to always keep waiting for more connections. #process_min_avail = 0 # If you set service_count=0, you probably need to grow this. #vsz_limit = 64M #} #service managesieve { # Max. number of ManageSieve processes (connections) #process_limit = 1024 #} # Service configuration protocol sieve { # Maximum ManageSieve command line length in bytes. ManageSieve usually does # not involve overly long command lines, so this setting will not normally # need adjustment #managesieve_max_line_length = 65536 # Maximum number of ManageSieve connections allowed for a user from each IP # address. # NOTE: The username is compared case-sensitively. #mail_max_userip_connections = 10 # Space separated list of plugins to load (none known to be useful so far). # Do NOT try to load IMAP plugins here. #mail_plugins = # MANAGESIEVE logout format string: # %i - total number of bytes read from client # %o - total number of bytes sent to client #managesieve_logout_format = bytes=%i/%o # To fool ManageSieve clients that are focused on CMU's timesieved you can # specify the IMPLEMENTATION capability that Dovecot reports to clients. # For example: 'Cyrus timsieved v2.2.13' #managesieve_implementation_string = Dovecot Pigeonhole # Explicitly specify the SIEVE and NOTIFY capability reported by the server # before login. If left unassigned these will be reported dynamically # according to what the Sieve interpreter supports by default (after login # this may differ depending on the user). #managesieve_sieve_capability = #managesieve_notify_capability = # The maximum number of compile errors that are returned to the client upon # script upload or script verification. #managesieve_max_compile_errors = 5 # Refer to 90-sieve.conf for script quota configuration and configuration of # Sieve execution limits. } ]]> = 2.1.4) : %v.%u # Dovecot v0.99.x : %v.%u # tpop3d : %Mf # # Note that Outlook 2003 seems to have problems with %v.%u format which was # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. # #pop3_uidl_format = %08Xu%08Xv # Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes # won't change those UIDLs. Currently this works only with Maildir. #pop3_save_uidl = no # What to do about duplicate UIDLs if they exist? # allow: Show duplicates to clients. # rename: Append a temporary -2, -3, etc. counter after the UIDL. #pop3_uidl_duplicates = allow # This option changes POP3 behavior so that it's not possible to actually # delete mails via POP3, only hide them from future POP3 sessions. The mails # will still be counted towards user's quota until actually deleted via IMAP. # Use e.g. "$POP3Deleted" as the value (it will be visible as IMAP keyword). # Make sure you can legally archive mails before enabling this setting. #pop3_deleted_flag = # POP3 logout format string: # %i - total number of bytes read from client # %o - total number of bytes sent to client # %t - number of TOP commands # %p - number of bytes sent to client as a result of TOP command # %r - number of RETR commands # %b - number of bytes sent to client as a result of RETR command # %d - number of deleted messages # %m - number of messages (before deletion) # %s - mailbox size in bytes (before deletion) # %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s # Workarounds for various client bugs: # outlook-no-nuls: # Outlook and Outlook Express hang if mails contain NUL characters. # This setting replaces them with 0x80 character. # oe-ns-eoh: # Outlook Express and Netscape Mail breaks if end of headers-line is # missing. This option simply sends it if it's missing. # The list is space-separated. #pop3_client_workarounds = protocol pop3 { # Space separated list of plugins to load (default is global mail_plugins). mail_plugins = $mail_plugins quota # Maximum number of POP3 connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. #mail_max_userip_connections = 10 } ]]> See sieve_before fore executing scripts before the user's personal # script. #sieve_default = /var/lib/dovecot/sieve/default.sieve sieve_global_path = /var/lib/dovecot/sieve/default.sieve # Directory for :personal include scripts for the include extension. This # is also where the ManageSieve service stores the user's scripts. #sieve_dir = ~/sieve sieve_dir = /var/sieve-userscripts/%u # Directory for :global include scripts for the include extension. #sieve_global_dir = sieve_global_dir = /var/lib/dovecot/sieve/global # Path to a script file or a directory containing script files that need to be # executed before the user's script. If the path points to a directory, all # the Sieve scripts contained therein (with the proper .sieve extension) are # executed. The order of execution within a directory is determined by the # file names, using a normal 8bit per-character comparison. Multiple script # file or directory paths can be specified by appending an increasing number. #sieve_before = #sieve_before2 = #sieve_before3 = (etc...) sieve_before = /var/lib/dovecot/sieve/before/ # Identical to sieve_before, only the specified scripts are executed after the # user's script (only when keep is still in effect!). Multiple script file or # directory paths can be specified by appending an increasing number. #sieve_after = #sieve_after2 = #sieve_after2 = (etc...) # Which Sieve language extensions are available to users. By default, all # supported extensions are available, except for deprecated extensions or # those that are still under development. Some system administrators may want # to disable certain Sieve extensions or enable those that are not available # by default. This setting can use '+' and '-' to specify differences relative # to the default. For example `sieve_extensions = +imapflags' will enable the # deprecated imapflags extension in addition to all extensions were already # enabled by default. #sieve_extensions = +notify +imapflags sieve_extensions = +spamtest +spamtestplus +relational +comparator-i;ascii-numeric +notify +imapflags # Which Sieve language extensions are ONLY available in global scripts. This # can be used to restrict the use of certain Sieve extensions to administrator # control, for instance when these extensions can cause security concerns. # This setting has higher precedence than the `sieve_extensions' setting # (above), meaning that the extensions enabled with this setting are never # available to the user's personal script no matter what is specified for the # `sieve_extensions' setting. The syntax of this setting is similar to the # `sieve_extensions' setting, with the difference that extensions are # enabled or disabled for exclusive use in global scripts. Currently, no # extensions are marked as such by default. #sieve_global_extensions = # The Pigeonhole Sieve interpreter can have plugins of its own. Using this # setting, the used plugins can be specified. Check the Dovecot wiki # (wiki2.dovecot.org) or the pigeonhole website # (http://pigeonhole.dovecot.org) for available plugins. # The sieve_extprograms plugin is included in this release. #sieve_plugins = # The separator that is expected between the :user and :detail # address parts introduced by the subaddress extension. This may # also be a sequence of characters (e.g. '--'). The current # implementation looks for the separator from the left of the # localpart and uses the first one encountered. The :user part is # left of the separator and the :detail part is right. This setting # is also used by Dovecot's LMTP service. #recipient_delimiter = + # The maximum size of a Sieve script. The compiler will refuse to compile any # script larger than this limit. If set to 0, no limit on the script size is # enforced. #sieve_max_script_size = 1M # The maximum number of actions that can be performed during a single script # execution. If set to 0, no limit on the total number of actions is enforced. #sieve_max_actions = 32 # The maximum number of redirect actions that can be performed during a single # script execution. If set to 0, no redirect actions are allowed. #sieve_max_redirects = 4 # The maximum number of personal Sieve scripts a single user can have. If set # to 0, no limit on the number of scripts is enforced. # (Currently only relevant for ManageSieve) #sieve_quota_max_scripts = 0 # The maximum amount of disk storage a single user's scripts may occupy. If # set to 0, no limit on the used amount of disk storage is enforced. # (Currently only relevant for ManageSieve) #sieve_quota_max_storage = 0 } ]]> dbname= user= password= # Default password scheme. # # List of supported schemes is in # http://wiki.dovecot.org/Authentication/PasswordSchemes # default_pass_scheme = CRYPT # passdb query to retrieve the password. It can return fields: # password - The user's password. This field must be returned. # user - user@domain from the database. Needed with case-insensitive lookups. # username and domain - An alternative way to represent the "user" field. # # The "user" field is often necessary with case-insensitive lookups to avoid # e.g. "name" and "nAme" logins creating two different mail directories. If # your user and domain names are in separate fields, you can return "username" # and "domain" fields instead of "user". # # The query can also return other fields which have a special meaning, see # http://wiki.dovecot.org/PasswordDatabase/ExtraFields # # Commonly used available substitutions (see http://wiki.dovecot.org/Variables # for full list): # %u = entire user@domain # %n = user part of user@domain # %d = domain part of user@domain # # Note that these can be used only as input to SQL query. If the query outputs # any of these substitutions, they're not touched. Otherwise it would be # difficult to have eg. usernames containing '%' characters. # # Example: # password_query = SELECT userid AS user, pw AS password \ # FROM users WHERE userid = '%u' AND active = 'Y' # #password_query = \ # SELECT username, domain, password \ # FROM users WHERE username = '%n' AND domain = '%d' password_query = SELECT username AS user, password_enc AS password, CONCAT(homedir, maildir) AS userdb_home, uid AS userdb_uid, gid AS userdb_gid, CONCAT('maildir:', homedir, maildir) AS userdb_mail, CONCAT('*:storage=', quota, 'M') as userdb_quota_rule FROM mail_users WHERE (username = '%u' OR email = '%u') AND ((imap = 1 AND '%Ls' = 'imap') OR (pop3 = 1 AND '%Ls' = 'pop3') OR '%Ls' = 'smtp' OR '%Ls' = 'sieve') #password_query = SELECT username as user, password, '/var/vmail/%d/%n' as userdb_home, 'maildir:/var/vmail/%d/%n' as userdb_mail, 150 as userdb_uid, 12 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1' # userdb query to retrieve the user information. It can return fields: # uid - System UID (overrides mail_uid setting) # gid - System GID (overrides mail_gid setting) # home - Home directory # mail - Mail location (overrides mail_location setting) # # None of these are strictly required. If you use a single UID and GID, and # home or mail directory fits to a template string, you could use userdb static # instead. For a list of all fields that can be returned, see # http://wiki.dovecot.org/UserDatabase/ExtraFields # # Examples: # user_query = SELECT home, uid, gid FROM users WHERE userid = '%u' # user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u' # user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u' # #user_query = \ # SELECT home, uid, gid \ # FROM users WHERE username = '%n' AND domain = '%d' user_query = SELECT CONCAT(homedir, maildir) AS home, CONCAT('maildir:', homedir, maildir) AS mail, uid, gid, CONCAT('*:storage=', quota, 'M') as quota_rule FROM mail_users WHERE (username = '%u' OR email = '%u') #user_query = SELECT '/var/vmail/%d/%n' as home, 'maildir:/var/vmail/%d/%n' as mail, 150 AS uid, 12 AS gid FROM mailbox WHERE username = '%u' AND active = '1' # If you wish to avoid two SQL lookups (passdb + userdb), you can use # userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll # also have to return userdb fields in password_query prefixed with "userdb_" # string. For example: #password_query = \ # SELECT userid AS user, password, \ # home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \ # FROM users WHERE userid = '%u' # Query to get a list of all usernames. #iterate_query = SELECT username AS user FROM users iterate_query = SELECT username AS user FROM mail_users ]]> or context # See: http://www.proftpd.org/docs/howto/Vhost.html # Trace logging, disabled by default for performance reasons # (http://www.proftpd.org/docs/howto/Tracing.html) #TraceLog /var/log/proftpd/trace.log #Trace DEFAULT:0 ServerName " FTP server" ServerIdent on "FTP Server ready." ServerAdmin root@ DefaultServer on # The DebugLevel directive configures the debugging level the server will use when logging. # The level parameter must be between 0 and 9. # This configuration directive will take precedence over any command-line debugging options used. #DebugLevel 9 # Cause every FTP user except adm to be chrooted into their home directory DefaultRoot ~ !adm # Use pam to authenticate (default) and be authoritative AuthPAMConfig proftpd AuthOrder mod_sql.c #AuthOrder mod_auth_pam.c* mod_auth_unix.c # If you use NIS/YP/LDAP you may need to disable PersistentPasswd #PersistentPasswd off # Don't do reverse DNS lookups (hangs on DNS problems) UseReverseDNS off # Set the user and group that the server runs as User nobody Group nobody # To prevent DoS attacks, set the maximum number of child processes # to 20. If you need to allow more than 20 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode; in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 20 # Disable sendfile by default since it breaks displaying the download speeds in # ftptop and ftpwho UseSendfile off # Define the log formats LogFormat default "%h %l %u %t \"%r\" %s %b" LogFormat auth "%v [%P] %h %t \"%r\" %s" # Dynamic Shared Object (DSO) loading # See README.DSO and howto/DSO.html for more details # # General database support (http://www.proftpd.org/docs/contrib/mod_sql.html) LoadModule mod_sql.c # # Support for base-64 or hex encoded MD5 and SHA1 passwords from SQL tables # (contrib/mod_sql_passwd.html) # LoadModule mod_sql_passwd.c # # Mysql support (requires proftpd-mysql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) LoadModule mod_sql_mysql.c # # Postgresql support (requires proftpd-postgresql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql_postgres.c # # Quota support (http://www.proftpd.org/docs/contrib/mod_quotatab.html) LoadModule mod_quotatab.c # # File-specific "driver" for storing quota table information in files # (http://www.proftpd.org/docs/contrib/mod_quotatab_file.html) # LoadModule mod_quotatab_file.c # # SQL database "driver" for storing quota table information in SQL tables # (http://www.proftpd.org/docs/contrib/mod_quotatab_sql.html) LoadModule mod_quotatab_sql.c # # LDAP support (requires proftpd-ldap package) # (http://www.proftpd.org/docs/directives/linked/config_ref_mod_ldap.html) # LoadModule mod_ldap.c # # LDAP quota support (requires proftpd-ldap package) # (http://www.proftpd.org/docs/contrib/mod_quotatab_ldap.html) # LoadModule mod_quotatab_ldap.c # # Support for authenticating users using the RADIUS protocol # (http://www.proftpd.org/docs/contrib/mod_radius.html) # LoadModule mod_radius.c # # Retrieve quota limit table information from a RADIUS server # (http://www.proftpd.org/docs/contrib/mod_quotatab_radius.html) # LoadModule mod_quotatab_radius.c # # SITE CPFR and SITE CPTO commands (analogous to RNFR and RNTO), which can be # used to copy files/directories from one place to another on the server # without having to transfer the data to the client and back # (http://www.castaglia.org/proftpd/modules/mod_copy.html) # LoadModule mod_copy.c # # Administrative control actions for the ftpdctl program # (http://www.proftpd.org/docs/contrib/mod_ctrls_admin.html) LoadModule mod_ctrls_admin.c # # Support for MODE Z commands, which allows FTP clients and servers to # compress data for transfer # (http://www.castaglia.org/proftpd/modules/mod_deflate.html) # LoadModule mod_deflate.c # # Execute external programs or scripts at various points in the process # of handling FTP commands # (http://www.castaglia.org/proftpd/modules/mod_exec.html) # LoadModule mod_exec.c # # Support for POSIX ACLs # (http://www.proftpd.org/docs/modules/mod_facl.html) # LoadModule mod_facl.c # # Support for using the GeoIP library to look up geographical information on # the connecting client and using that to set access controls for the server # (http://www.castaglia.org/proftpd/modules/mod_geoip.html) # LoadModule mod_geoip.c # # Allow for version-specific configuration sections of the proftpd config file, # useful for using the same proftpd config across multiple servers where # different proftpd versions may be in use # (http://www.castaglia.org/proftpd/modules/mod_ifversion.html) # LoadModule mod_ifversion.c # # Configure server availability based on system load # (http://www.proftpd.org/docs/contrib/mod_load.html) # LoadModule mod_load.c # # Limit downloads to a multiple of upload volume (see README.ratio) # LoadModule mod_ratio.c # # Rewrite FTP commands sent by clients on-the-fly, # using regular expression matching and substitution # (http://www.proftpd.org/docs/contrib/mod_rewrite.html) # LoadModule mod_rewrite.c # # Support for the SSH2, SFTP, and SCP protocols, for secure file transfer over # an SSH2 connection (http://www.castaglia.org/proftpd/modules/mod_sftp.html) # LoadModule mod_sftp.c # # Use PAM to provide a 'keyboard-interactive' SSH2 authentication method for # mod_sftp (http://www.castaglia.org/proftpd/modules/mod_sftp_pam.html) # LoadModule mod_sftp_pam.c # # Use SQL (via mod_sql) for looking up authorized SSH2 public keys for user # and host based authentication # (http://www.castaglia.org/proftpd/modules/mod_sftp_sql.html) # LoadModule mod_sftp_sql.c # # Provide data transfer rate "shaping" across the entire server # (http://www.castaglia.org/proftpd/modules/mod_shaper.html) # LoadModule mod_shaper.c # # Support for miscellaneous SITE commands such as SITE MKDIR, SITE SYMLINK, # and SITE UTIME (http://www.proftpd.org/docs/contrib/mod_site_misc.html) # LoadModule mod_site_misc.c # # Provide an external SSL session cache using shared memory # (contrib/mod_tls_shmcache.html) # LoadModule mod_tls_shmcache.c # # Provide a memcached-based implementation of an external SSL session cache # (contrib/mod_tls_memcache.html) # LoadModule mod_tls_memcache.c # # Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny # files, for IP-based access control # (http://www.proftpd.org/docs/contrib/mod_wrap.html) # LoadModule mod_wrap.c # # Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny # files, as well as SQL-based access rules, for IP-based access control # (http://www.proftpd.org/docs/contrib/mod_wrap2.html) # LoadModule mod_wrap2.c # # Support module for mod_wrap2 that handles access rules stored in specially # formatted files on disk # (http://www.proftpd.org/docs/contrib/mod_wrap2_file.html) # LoadModule mod_wrap2_file.c # # Support module for mod_wrap2 that handles access rules stored in SQL # database tables (http://www.proftpd.org/docs/contrib/mod_wrap2_sql.html) # LoadModule mod_wrap2_sql.c # # Implement a virtual chroot capability that does not require root privileges # (http://www.castaglia.org/proftpd/modules/mod_vroot.html) # Using this module rather than the kernel's chroot() system call works # around issues with PAM and chroot (http://bugzilla.redhat.com/506735) LoadModule mod_vroot.c # # Provide a flexible way of specifying that certain configuration directives # only apply to certain sessions, based on credentials such as connection # class, user, or group membership # (http://www.proftpd.org/docs/contrib/mod_ifsession.html) # LoadModule mod_ifsession.c # Allow only user root to load and unload modules, but allow everyone # to see which modules have been loaded # (http://www.proftpd.org/docs/modules/mod_dso.html#ModuleControlsACLs) ModuleControlsACLs insmod,rmmod allow user root ModuleControlsACLs lsmod allow user * # Enable basic controls via ftpdctl # (http://www.proftpd.org/docs/modules/mod_ctrls.html) ControlsEngine on ControlsACLs all allow user root ControlsSocketACL allow user * ControlsLog /var/log/proftpd/controls.log # Enable admin controls via ftpdctl # (http://www.proftpd.org/docs/contrib/mod_ctrls_admin.html) AdminControlsEngine on AdminControlsACLs all allow user root # Enable mod_vroot by default for better compatibility with PAM # (http://bugzilla.redhat.com/506735) VRootEngine on # TLS (http://www.castaglia.org/proftpd/modules/mod_tls.html) TLSEngine on TLSRequired on TLSRSACertificateFile /etc/pki/tls/certs/proftpd.pem TLSRSACertificateKeyFile /etc/pki/tls/certs/proftpd.pem TLSCipherSuite ALL:!ADH:!DES TLSOptions NoCertRequest NoSessionReuseRequired TLSVerifyClient off #TLSRenegotiate ctrl 3600 data 512000 required off timeout 300 TLSLog /var/log/proftpd/tls.log TLSSessionCache shm:/file=/var/run/proftpd/sesscache # Dynamic ban lists (http://www.proftpd.org/docs/contrib/mod_ban.html) # Enable this with PROFTPD_OPTIONS=-DDYNAMIC_BAN_LISTS in /etc/sysconfig/proftpd LoadModule mod_ban.c BanEngine on BanLog /var/log/proftpd/ban.log BanTable /var/run/proftpd/ban.tab # If the same client reaches the MaxLoginAttempts limit 2 times # within 10 minutes, automatically add a ban for that client that # will expire after one hour. BanOnEvent MaxLoginAttempts 2/00:10:00 01:00:00 # Inform the user that it's not worth persisting BanMessage "Host %a has been banned" # Allow the FTP admin to manually add/remove bans BanControlsACLs all allow user ftpadm # Set networking-specific "Quality of Service" (QoS) bits on the packets used # by the server (contrib/mod_qos.html) LoadModule mod_qos.c # RFC791 TOS parameter compatibility QoSOptions dataqos throughput ctrlqos lowdelay # For a DSCP environment (may require tweaking) #QoSOptions dataqos CS2 ctrlqos AF41 # Global Config - config common to Server Config and all virtual hosts # See: http://www.proftpd.org/docs/howto/Vhost.html # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable Umask 077 # Allow users to overwrite files and change permissions AllowOverwrite yes AllowAll # CH-Root all users DefaultRoot ~ # Reject rootlogin (just for security) RootLogin off # Noo need to require valid shell, because user is virtual RequireValidShell off # A basic anonymous configuration, with an upload directory # Enable this with PROFTPD_OPTIONS=-DANONYMOUS_FTP in /etc/sysconfig/proftpd # #User ftp #Group ftp #AccessGrantMsg "Anonymous login ok, restrictions apply." ## We want clients to be able to login with "anonymous" as well as "ftp" #UserAlias anonymous ftp ## Limit the maximum number of anonymous logins #MaxClients 10 "Sorry, max %m users -- try again later" ## Put the user into /pub right after login ##DefaultChdir /pub ## We want 'welcome.msg' displayed at login, '.message' displayed in ## each newly chdired directory and tell users to read README* files. #DisplayLogin /welcome.msg #DisplayChdir .message #DisplayReadme README* ## Cosmetic option to make all files appear to be owned by user "ftp" #DirFakeUser on ftp #DirFakeGroup on ftp ## Limit WRITE everywhere in the anonymous chroot # #DenyAll # ## An upload directory that allows storing files but not retrieving ## or creating directories. # #AllowOverwrite no # #DenyAll # # #AllowAll # # ## Don't write anonymous accesses to the system wtmp file (good idea!) #WtmpLog off ## Logging for the anonymous transfers #ExtendedLog /var/log/proftpd/access.log WRITE,READ default #ExtendedLog /var/log/proftpd/auth.log AUTH auth # SQLLogFile /var/log/proftpd/sql.log SQLAuthTypes Crypt SQLAuthenticate users* groups* SQLConnectInfo @ SQLUserInfo ftp_users username password uid gid homedir shell SQLGroupInfo ftp_groups groupname gid members SQLUserWhereClause "login_enabled = 'y'" SQLLog PASS login #SQLNamedQuery login UPDATE "last_login=now(), login_count=login_count+1 WHERE username='%u'" ftp_users SQLLog RETR download #SQLNamedQuery download UPDATE "down_count=down_count+1, down_bytes=down_bytes+%b WHERE username='%u'" ftp_users SQLLog STOR upload #SQLNamedQuery upload UPDATE "up_count=up_count+1, up_bytes=up_bytes+%b WHERE username='%u'" ftp_users #QuotaEngine on #QuotaShowQuotas on #QuotaDisplayUnits Mb #QuotaLock /var/lock/ftpd.quotatab.lock #QuotaLimitTable sql:/get-quota-limit #QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally #SQLNamedQuery get-quota-limit SELECT "ftp_users.username AS name, ftp_quotalimits.quota_type, ftp_quotalimits.per_session, ftp_quotalimits.limit_type, panel_customers.diskspace*1024 AS bytes_in_avail, ftp_quotalimits.bytes_out_avail, ftp_quotalimits.bytes_xfer_avail, ftp_quotalimits.files_in_avail, ftp_quotalimits.files_out_avail, ftp_quotalimits.files_xfer_avail FROM ftp_users, ftp_quotalimits, panel_customers WHERE ftp_users.username = '%{0}' AND panel_customers.loginname = SUBSTRING_INDEX('%{0}', 'ftp', 1) AND quota_type ='%{1}'" #SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used,bytes_out_used, bytes_xfer_used, files_in_used, files_out_used,files_xfer_used FROM ftp_quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'" #SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used= files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name= '%{6}' AND quota_type = '%{7}'" ftp_quotatallies #SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4},%{5}, %{6}, %{7}" ftp_quotatallies ]]> scripts/froxlor_master_cronjob.php ]]> database username password #socket /var/lib/mysql/mysql.sock #port 3306 ]]> {{sql.socket}} password ]]> *.log { missingok weekly rotate 4 compress delaycompress notifempty create sharedscripts postrotate > /dev/null 2>&1 || true endscript } ]]>